Buy J518 Flange Pipe part by Sae International

Part Number:  J518
Manufacturer:  sae international
NIIN:  015030937
Item Name :  flange pipe
CAGE Code:  0U583
INC Code:  03798
Country:  USA
NCB Code:  01
FSG:  47 Pipe Tubing Hose and Fittings

Your request for part number J518 which is described as Flange Pipe manufactured by Sae International with CAGE code 0U583 will be reviewed by one of Aerospace Exchange’s parts experts. Please fill out the form to request a quotation for J518 under FSC 4730 Hose Pipe Tube Lubrication and Railing Fittings with NSN 4730-01-503-0937.

Thank You for the quote request for J518 from manufacturer Sae International with CAGE code 0U583. Aerospace Exchange offers a perse selection of national stock numbers and civilian parts for the aviation and aerospace industry.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for J518

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

A dedicated sales representative will email and call with pricing, lead-time, condition, and quantity. Our customer service executives are committed to provide you with the most competitive quote. ASAP Semiconductor appreciates the opportunity to earn your business and please do not hesitate to contact us for any other inquiries.

NSN Information for Part Number J518 with NSN 4730-01-503-0937, 4730015030937

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4730-01-503-0937

Item PartTypeName:

FLANGE,PIPE

4730015030937YN
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
16 110162595

Characteristics Data of NSN 4730-01-503-0937, 4730015030937

MRCCriteriaCharacteristic
CQCJMAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED3000.0 POUNDS PER SQUARE INCH FUEL/OIL, HYDROCARBON
ZZZTNONDEFINITIVE SPEC/STD DATA4 FIGURE
MATTMATERIALSTEEL OR IRON
ABKKFLANGE DIAMETER2.000 INCHES NOMINAL
ABMHRECESS DEPTH0.355 INCHES NOMINAL
ADVDOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.810 INCHES NOMINAL
AECSBOLT HOLE QUANTITY4
AGFFFLANGE WIDTH3.720 INCHES NOMINAL
AJEQREDUCER FLANGE HOLE TYPECONCENTRIC
STYLSTYLE DESIGNATORBOLT HOLE CONNECTOR PLATE
AJEGNECK HEIGHT0.293 INCHES NOMINAL
AHNXBOLT HOLE DIAMETER0.531 INCHES NOMINAL
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.062 INCHES NOMINAL
AFQNFLANGE LENGTH3.940 INCHES MINIMUM AND 4.060 INCHES MAXIMUM
AJEMFLANGE SECTION STYLERAISED FACED, DISHED
ABMDRECESS DIAMETER2.844 INCHES NOMINAL
CBBLFEATURES PROVIDEDO RING
ABNMTHICKNESS1.030 INCHES NOMINAL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-DTL-52525E MIL SPEC SINGLE MATERIAL RESPONSE
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-DTL-52525/16C GOVERNMENT SPECIFICATION AND 81343-J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
AKWEFACE SEATING SURFACE CONDITIONMACHINED
AGAVEND ITEM IDENTIFICATIONNSN3930-01-417-2886 - TRUCK, FORKLIFT 1000M

Schedule B & Trade

End Use : 12110 Iron and steel products, other
Schedule B : 7307912000 (NAICS 332919) Flanges of iron or nonalloy steel
SITC : 67959 Iron and steel tube and pipe fittings, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL J2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 052190 - Pipe, tubing, or pipe or tubing fitti
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 576 - Metal and metal products, nos, (less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top