We've received your request for 3429699-2 (described as Gasket), manufactured by Ace Rubbber Co Inc with CAGE code 07013. This part is registered under NSN 5330-01-022-8141, classified in FSG 53 Hardware and Abrasives / FSC 5330 Packing and Gasket Materials. Our verification process will confirm traceability through supporting identifiers including NIIN 01-022-8141, NCB code 01 (origin: USA), and INC 04522. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 3429699-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-01-022-8141 Item PartTypeName: GASKET | 5330 | 010228141 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3429699-2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| AAUB | HOLE DIAMETER | 0.171 INCHES NOMINAL |
| ABJH | TEMP RATING | 350.0 DEG FAHRENHEIT |
| ABKG | BOLT CIRCLE DIAMETER | 1.186 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 1.582 INCHES NOMINAL |
| ABVL | APERTURE DIAMETER | 0.578 INCHES NOMINAL |
| ADPW | OUTSIDE CORNER RADIUS | 0.198 INCHES NOMINAL |
| ADVC | SIDE RADIUS FROM GASKET CENTER | 0.535 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.010 INCHES MINIMUM AND 0.014 INCHES MAXIMUM |
| AECS | BOLT HOLE QUANTITY | 2 |
| MATT | MATERIAL | RUBBER SYNTHETIC OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HMS17-1764 TY 1 FSCM 82577 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 596 - Gaskets, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
