Buy 1201B Oscillograph part by Adatum Inc

Part Number:  1201B
Manufacturer:  adatum inc
NIIN:  013537156
Item Name :  oscillograph
CAGE Code:  24672
INC Code:  18700
Country:  USA
NCB Code:  01
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 1201B (described as Oscillograph), manufactured by Adatum Inc with CAGE code 24672. This part is registered under NSN 6625-01-353-7156, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-353-7156, NCB code 01 (origin: USA), and INC 18700. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1201B requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1201B

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 1201B, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-353-7156, 6625013537156

MRCCriteriaCharacteristic
BKBXRECORDING CHANNEL QUANTITY1
AMQYINSTALLATION DESIGNFIXED
ACDCCURRENT TYPEAC
ANBKRECORDING METHODELECTROSENSITIVE PAPER
SUPPIII SUPPLEMENTARY FEATURESINPUTS 2,1. SINE WAVE 100HZ TO 5MHZ 0.3 TO 10VRMS; 2. SQUARE WAVE 100HZ TO 5MHZ 1.5 TO 30VPP; RECORDER: 1 INCH (2.5CM) PER HOUR,1800 STRIKES PER HOUR,RECTILINEAR PAPER,FULL 12 HR. VIEWING AREA,FRONT PANEL PAPER ADVANCERESOLUTION; 7.2DEG. PER MINOR DIVISIONPHASE MEASUREMENT ACCURACY: 5% OF FULLSCALE BELOW 1 MHZ
FAAZPHASESINGLE INPUT
BKBYRECORDING FREQUENCY RANGE IN HERTZ100.0 TO 5000000.0
BKCBCHART SPEED2.5 CENTIMETERS PER HOUR
FEATSPECIAL FEATURESACCESSORY PACKAGE: INCLUDES POWERCORD,ROLL OF CHART PAPER,SPARE FUSESAND TECHNICAL MANUAL
SR-5THE MANUFACTURERS DATA
ABKWOVERALL HEIGHT3.500 INCHES NOMINAL
BKCDEVENT MARKERNOT PROVIDED
AGAVIII END ITEM IDENTIFICATIONPORTABLE PMEL LAB (FAST-CAL)
ABMKOVERALL WIDTH19.000 INCHES NOMINAL
SR-5MANUFACTURERS CODE24672
FTLDIII FUNCTIONAL DESCRIPTIONRECORDING PHASE DIFFERENCES BETWEEN 2 INPUT SIGNALS
SR-5DESIGN CONTROL REFERENCE1201B
AMSEVOLTAGE RATING97.5 VOLTS MINIMUM AND 115.0 VOLTS MAXIMUM INPUT
ABHPOVERALL LENGTH6.500 INCHES NOMINAL
ACZBFREQUENCY RATING60.0 HERTZ NOMINAL INPUT

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030201500 (NAICS 334515) Oscilloscopes and oscillographs
SITC : 87473 Cathode-ray oscilloscopes and cathode-ray oscillographs

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL --yrh-e
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Flz
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: E - 175.0
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 738 - Computing equipment, computer components, and circuit cards

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top