Buy ADIGC-25PF-2 Connector Receptacl part by Adi Electronics Inc

Part Number:  ADIGC-25PF-2
Alternate P/N:  ADIGC25PF2
Manufacturer:  adi electronics inc
NIIN:  010657459
Item Name :  connector receptacl
CAGE Code:  60430
INC Code:  15093
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for ADIGC-25PF-2 (described as Connector Receptacl), manufactured by Adi Electronics Inc with CAGE code 60430. This part is registered under NSN 5935-01-065-7459, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-065-7459, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your ADIGC-25PF-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ADIGC-25PF-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part ADIGC-25PF-2, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number ADIGC-25PF-2 with NSN 5935-01-065-7459, 5935010657459

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-01-065-7459

Item PartTypeName:

CONNECTOR,RECEPTACLE,ELECTRICAL

59350106574590PA
CIICHCCESDPMICCriticalityENAC
UAG0
Part NumberISCRNVCRNCCHCCMSDSSADC
205487-211CA

Characteristics Data of NSN 5935-01-065-7459, 5935010657459

MRCCriteriaCharacteristic
AAQLBODY STYLESTRAIGHT SHAPE
ABHPOVERALL LENGTH2.073 INCHES MINIMUM AND 2.103 INCHES MAXIMUM
ABMKOVERALL WIDTH0.479 INCHES MINIMUM AND 0.509 INCHES MAXIMUM
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND MOISTURE PROOF AND SHOCK RESISTANT AND VIBRATION PROOF
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS1.847 INCHES MINIMUM AND 1.857 INCHES MAXIMUM
AFQWMATING END QUANTITY1
AFQXCONTACT POSITION ARRANGEMENT STYLE25 SINGLE MATING END
AFQZCONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODMATING END
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODFRICTION
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD AND COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC DIALLYL PHTHALATE SINGLE MATING END
CSCFTERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
CSWMSHELL SURFACE TREATMENTCADMIUM
CTBCSHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
CXCGINCLUDED CONTACT QUANTITY25 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PMWTPRECIOUS MATERIAL AND WEIGHT0.025 GOLD GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD
TESTTEST DATA DOCUMENT81349-MIL-C-24308 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
ZZZKSPECIFICATION/STANDARD DATA81349-24308/4 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8538907080 (NAICS 335314) Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282 Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack No qup
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top