Buy 46353-L1 Fuseholder Extracto part by Air System Components Inc

Part Number:  46353-L1
Alternate P/N:  46353L1
Manufacturer:  air system components inc
NIIN:  008241515
Item Name :  fuseholder extracto
CAGE Code:  95802
INC Code:  28909
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 46353-L1 (described as Fuseholder Extracto), manufactured by Air System Components Inc with CAGE code 95802. This part is registered under NSN 5920-00-824-1515, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5920 Fuses Arresters Absorbers and Protector. Our verification process will confirm traceability through supporting identifiers including NIIN 00-824-1515, NCB code 00 (origin: USA), and INC 28909. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 46353-L1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 46353-L1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 46353-L1, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 46353-L1 with NSN 5920-00-824-1515, 5920008241515

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5920-00-824-1515

Item PartTypeName:

FUSEHOLDER,EXTRACTOR POST

59200082415150P
CIICHCCESDPMICCriticalityENAC
U S
Part NumberISCRNVCRNCCHCCMSDSSADC
02-61-201031CA

Characteristics Data of NSN 5920-00-824-1515, 5920008241515

MRCCriteriaCharacteristic
AAQLBODY STYLEREAR PANEL MOUNTED TYPE
ABHPOVERALL LENGTH4.000 INCHES MINIMUM AND 4.250 INCHES MAXIMUM
ABKWOVERALL HEIGHT1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
ABTJMOUNTING HOLE QUANTITY4
AFRGCONTACT MATERIALANY ACCEPTABLE
AFRHCONTACT SURFACE TREATMENTSILVER PLATED,QQ-S-365
AGAVEND ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL (LSV)
AGUEFUSE ACCOMMODATION QUANTITY1
AGUJACCOMMODATED FUSE LENGTH1.500 INCHES NOMINAL
AGUPINDICATING LAMP VOLTAGE RANGE IN VOLTS90.0 TO 500.0
AGUTLENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
AGVFBUSHING HOLE DIAMETER1.135 INCHES MINIMUM AND 1.145 INCHES MAXIMUM
AGVJCENTER TO CENTER DISTANCE BETWEEN BUSHING HOLE AND MOUNTING HOLE0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.164 INCHES NOMINAL
CQJLCURRENT CARRYING RATING IN AMPS30.0
ELECVOLTAGE IN VOLTS500.0
TESTTEST DATA DOCUMENT81349-MIL-F-19207/3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLEC
TTQYTERMINAL TYPE AND QUANTITY2 THREADED STUD
ABMKOVERALL WIDTH1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
ABTBMOUNTING HOLE DIAMETER0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
AEVBMOUNTING HOLE STYLEBUSHING MOUNTING W/4 HOLES
AFXHINTERRUPTION INDICATOR METHODNEON LAMP
AGUKACCOMMODATED FERRULE DIAMETER0.406 INCHES NOMINAL
AGUNRESISTOR RATING330.0 KILOHMS
AGVACENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM
AGVBCENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM
AJYQSCREW THREAD QUANTITY PER INCH32.0
CSNMFUSE TERMINAL TYPE ACCOMMODATEDFERRULE
AAFZBODY MATERIALPLASTIC,DIALLYL PHTHALATE,MIL-M-14,TYPE SDG

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top