We've received your request for WGA 61Q (described as Seal Nonmetallic St), manufactured by Airborn Interconnect Inc with CAGE code 10400. This part is registered under NSN 5330-01-089-6069, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-089-6069, NCB code 01 (origin: USA), and INC 36874. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your WGA 61Q requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-01-089-6069 Item PartTypeName: SEAL,NONMETALLIC STRIP | 5330 | 010896069 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 536225-18 | 6 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD | SOLID |
| ABSX | ATTACHMENT METHOD | ROUND HOLE |
| ADTL | ATTACHMENT FEATURE QUANTITY | 21 |
| ADTM | ATTACHMENT HOLE DIAMETER | 0.029 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| ADVN | CROSS-SECTIONAL HEIGHT | 0.040 INCHES NOMINAL |
| ADWH | CROSS-SECTIONAL WIDTH | 0.250 INCHES NOMINAL |
| CQCF | CONSTRUCTION | SOLID |
| CTTK | END CUT ANGLE | 63.0 DEGREES |
| MATT | MATERIAL | RUBBER SILICONE CLASS Q OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| End Use : 12770 | Other industrial supplies |
|---|---|
| Schedule B : 3926904500 (NAICS 339991) | Gaskets, washers & other seals |
| SITC : 89399 | Articles of plastics, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9sx-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote