Buy 209-2-6467-8 Circuit Breaker part by Airpax Electronics Inc

Part Number:  209-2-6467-8
Alternate P/N:  209264678
Manufacturer:  airpax electronics inc
NIIN:  013475807
Item Name :  circuit breaker
CAGE Code:  4K035
INC Code:  00136
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 209-2-6467-8 (described as Circuit Breaker), manufactured by Airpax Electronics Inc with CAGE code 4K035. This part is registered under NSN 5925-01-347-5807, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5925 Circuit Breakers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-347-5807, NCB code 01 (origin: USA), and INC 00136. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 209-2-6467-8 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 209-2-6467-8

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 209-2-6467-8, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 209-2-6467-8 with NSN 5925-01-347-5807, 5925013475807

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5925-01-347-5807

Item PartTypeName:

CIRCUIT BREAKER

59250134758070P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
209-2-6467-8523

Characteristics Data of NSN 5925-01-347-5807, 5925013475807

MRCCriteriaCharacteristic
ADAQBODY LENGTH5.125 INCHES NOMINAL
ADATBODY WIDTH2.072 INCHES MAXIMUM
AJECBOSS HEIGHT0.220 INCHES NOMINAL
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE3.535 INCHES MINIMUM AND 3.565 INCHES MAXIMUM
APNQARC QUENCHING METHODMAGNETIC BLOWOUT
CMLPTHREAD QUANTITY PER INCH32
CPRTMANUAL ACTUATOR TYPE AND QUANTITY2 TOGGLE
AKPXPOLE QUANTITY2
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE
CPRJTRIP RELEASE METHODMAGNETIC ALL LOCATIONS
CPRQRESET METHODMANUAL
CTJSUNPACKAGED UNIT WEIGHT1.300 POUNDS NOMINAL
CWJKCASE MATERIALPLASTIC
TTQYTERMINAL TYPE AND QUANTITY4 THREADED STUD
AEBPCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH3.550 INCHES NOMINAL
AEBQCENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH1.026 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.750 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.026 INCHES NOMINAL
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
BBRJSPECIAL HANDLING FEATUREMAGNETIC
CPRHCIRCUIT PROTECTION TYPEOVERCURRENT ALL LOCATIONS
CPRWACTUATOR FUNCTIONTRIP-RESET
CPRXACTUATOR POSITION DESIGNATIONAT EACH POLE
CPRYEXTERNAL ACTUATOR LINKAGE ARRANGEMENTONE AND TWO LINKED
CPSMINTERNAL TRIP RELEASE CONFIGURATIONSERIES TRIP ALL LOCATIONS
CQJXNOMINAL THREAD SIZE0.138 INCHES
CQXFINCLOSURE PROTECTION TYPE FOR WHICH DESIGNEDFUNGUS RESISTANT AND MOISTURE RESISTANT
AAQLBODY STYLEMULTIPOLE-MULTIPLE ACTUATOR TYPE
AFJNFRAGILITY FACTORMODERATELY RUGGED
CPRGMAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS5000.0 AC ALL LOCATIONS
CPRRMAIN CONTACT TRIPPING MECHANISM TYPETRIP FREE
THSDTHREAD SERIES DESIGNATORUNC

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536200040 (NAICS 335313) Automatic circuit breakers, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77252 Automatic circuit breakers for a voltage not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top