Buy VB90353-14-13 Rivet Blind part by Alcoa Global Fasteners Inc

Part Number:  VB90353-14-13
Alternate P/N:  VB903531413
Manufacturer:  alcoa global fasteners inc
NIIN:  002550490
Item Name :  rivet blind
CAGE Code:  92215
INC Code:  00864
Country:  USA
NCB Code:  00

We've received your request for VB90353-14-13 (described as Rivet Blind), manufactured by Alcoa Global Fasteners Inc with CAGE code 92215. This part is registered under NSN 5320-00-255-0490, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-255-0490, NCB code 00 (origin: USA), and INC 00864. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your VB90353-14-13 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for VB90353-14-13

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part VB90353-14-13, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number VB90353-14-13 with NSN 5320-00-255-0490, 5320002550490

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5320-00-255-0490

Item PartTypeName:

RIVET,BLIND

53200025504900N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
73756-14-13215

Characteristics Data of NSN 5320-00-255-0490, 5320002550490

MRCCriteriaCharacteristic
AASBFASTENER LENGTH1.147 INCHES MINIMUM AND 1.177 INCHES MAXIMUM
AASKHEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER)
AAZESHANK DIAMETER0.435 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
AAZFSHANK STYLESELF-PLUGGING MECHANICALLY LOCKED STEM
AAZGHEAD MAJOR DIAMETER0.890 INCHES MAXIMUM
ABAFEXPANSION DEVICESERRATED STEM-TYPE W
ANEEGRIP LENGTH0.781 INCHES MINIMUM AND 0.845 INCHES MAXIMUM
CQFMHARDNESS RATING32.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM BODY
CQFMHARDNESS RATING48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM
CQSXSHEAR STRENGTH16700 SINGLE POUNDS PER SQUARE INCH
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATTMATERIALSTEEL COMP 4037 OR STEEL COMP 4130 BODY
MATTMATERIALSTEEL COMP 8740 STEM
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-405 FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-405 FED SPEC 2ND MATERIAL RESPONSE OR MIL-C-6758 MIL SPEC 2ND MATERIAL RESPONSE BODY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM
SFTTSURFACE TREATMENTCADMIUM BODY
SFTTSURFACE TREATMENTCADMIUM STEM
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1 OR 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BODY

Schedule B & Trade

End Use : 12300 Finished metal shapes
Schedule B : 7318230000 (NAICS 332722) Rivets of iron or steel
SITC : 69422 Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, not threaded, of iron or steel

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9sx-n
Quantity per pack 25
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: U - 50.0
NMFC: 106510 - Rivets i/s plain/galvanized etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 713 - Metal hardware

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top