Buy 336253-33 Clip Spring Tension part by Alliant Techsystems Operations Llc

Part Number: 336253-33

Alternate P/N: 33625333

Manufacturer: alliant techsystems operations llc

NSN: 5340-01-017-4626

NIIN: 010174626

Item Name : clip spring tension

CAGE Code: 06424

FSC: 5340 Hardware Commercial

INC Code: 20815

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 336253-33 (described as Clip Spring Tension), manufactured by Alliant Techsystems Operations Llc with CAGE code 06424. This part is registered under NSN 5340-01-017-4626, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 01-017-4626, NCB code 01 (origin: USA), and INC 20815. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 336253-33 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 336253-33

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 336253-33, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 336253-33 with NSN 5340-01-017-4626, 5340010174626

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-017-4626 Item PartTypeName: CLIP,SPRING TENSION	5340	010174626	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
336253-33	5	9	5

Characteristics Data of NSN 5340-01-017-4626, 5340010174626

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.128 INCHES NOMINAL
ABGL	WIDTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
ABKW	OVERALL HEIGHT	1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM
ABRY	LENGTH	0.910 INCHES MINIMUM AND 0.950 INCHES MAXIMUM
AXGY	MOUNTING METHOD	UNTHREADED HOLE
AZWE	DISTANCE FROM LOOP CENTER TO END	0.542 INCHES MINIMUM
CJYS	LOOP/HOLDING DIMENSION	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
MATT	MATERIAL	STEEL OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7326908530 (NAICS 332999)	Hangers and similar supports for tubes and pipes, of iron or steel
SITC : 69969	Articles of iron or steel, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	25
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	094220 - Clips sheet steel noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware