Buy JH6D48VDC Relay Electromagnet part by Allied Controls Inc

Part Number:  JH6D48VDC
Manufacturer:  allied controls inc
NIIN:  000040553
Item Name :  relay electromagnet
CAGE Code:  02288
INC Code:  32512
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for JH6D48VDC (described as Relay Electromagnet), manufactured by Allied Controls Inc with CAGE code 02288. This part is registered under NSN 5945-00-004-0553, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5945 Relays and Solenoids. Our verification process will confirm traceability through supporting identifiers including NIIN 00-004-0553, NCB code 00 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your JH6D48VDC requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for JH6D48VDC

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part JH6D48VDC, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5945-00-004-0553, 5945000040553

MRCCriteriaCharacteristic
CBMECUBIC MEASURE0.628 CUBIC INCHES
APNPDUTY TYPECONTINUOUS
ADTVCASE MATERIALMETAL
APCNCOIL QUANTITY1
CRPQNOMINAL OPERATING CURRENT RATING AND TYPE24.0 MILLIAMPERES DC SINGLE WINDING
ABKWOVERALL HEIGHT1.190 INCHES MAXIMUM
AFJNFRAGILITY FACTORMODERATELY RUGGED
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 UNTHREADED HOLE SINGLE MOUNTING FACILITY
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY
CRXHTIME DELAY0.005 SECONDS MAXIMUM FIXED OPERATE TIME
CWABMAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS29.0 DC
TTQYTERMINAL TYPE AND QUANTITY8 WIRE HOOK ALL FUNCTIONS
ADZCENVIRONMENTAL PROTECTIONHERMETIC AND SHOCK RESISTANT AND VIBRATION RESISTANT
ABHPOVERALL LENGTH1.320 INCHES MAXIMUM
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.078 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABMKOVERALL WIDTH0.400 INCHES MAXIMUM
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.120 INCHES NOMINAL SINGLE MOUNTING FACILITY
AKDXWINDING QUANTITY1
AKSLPURPOSE FOR WHICH DESIGNEDGENERAL
APNAWINDING DC RESISTANCE RATING2.02 KILOHMS NOMINAL SINGLE WINDING
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
CQYJMOUNTING FACILITY PATTERNIN-LINE SINGLE MOUNTING FACILITY
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP48.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE5.0 AMPERES DC RESISTIVE LOAD

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536410020 (NAICS 335314) Relays, electromechanical, with contacts rated less than 10 a, for a voltage not exceeding 60 v
SITC : 77254 Relays for electrical apparatus used with electrical circuits not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top