Buy 234336 Hose Assembly Nonme part by Allied Systems Corp

Part Number: 234336

Manufacturer: allied systems corp

NSN: 4720-01-383-2362

NIIN: 013832362

Item Name : hose assembly nonme

CAGE Code: 60848

FSC: 4720 Hose and Tubing Flexible

INC Code: 20311

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

We've received your request for 234336 (described as Hose Assembly Nonme), manufactured by Allied Systems Corp with CAGE code 60848. This part is registered under NSN 4720-01-383-2362, classified in FSG 47 Pipe Tubing Hose and Fittings / FSC 4720 Hose and Tubing Flexible. Our verification process will confirm traceability through supporting identifiers including NIIN 01-383-2362, NCB code 01 (origin: USA), and INC 20311. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 234336 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 234336

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 234336, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 234336 with NSN 4720-01-383-2362, 4720013832362

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-01-383-2362 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	013832362	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
234336	2	2	3

Characteristics Data of NSN 4720-01-383-2362, 4720013832362

MRC	Criteria	Characteristic
ACKH	MINIMUM INSIDE BENDING RADIUS	16.500 INCHES
CRZY	(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY	NOT INCLUDED
ADUY	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.188 INCHES NOMINAL 1ST END 1.188 INCHES NOMINAL 2ND END
CQGH	(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL	COMPLETE FITTING STEEL, CORROSION RESISTING
CQBB	(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
AWLS	CONNECTION TYPE	PLAIN FACE FLANGE 1ST END PLAIN FACE FLANGE 2ND END
CQBG	(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY	NOT INCLUDED
ADLG	(NON-CORE DATA) FIRST END FITTING SPEC/STD DATA	SAE J518C, TABLE 1A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
ADJM	(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL	RUBBER, SYNTHETIC
ADLH	(NON-CORE DATA) SECOND END FITTING SPEC/STD DATA	SAE J518C, TABLE 1A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CRBL	(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL	COMPLETE FITTING STEEL, CORROSION RESISTING
ADLF	(NON-CORE DATA) HOSE OR TUBING SPEC/STD DATA	SAE J517, 100R12, SIZE 20-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
ABKV	OUTSIDE DIAMETER	1.850 INCHES NOMINAL
AECS	BOLT HOLE QUANTITY	4 1ST END
AHNC	CONNECTION STYLE	PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END
AARX	INSIDE DIAMETER	1.250 INCHES NOMINAL
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CQGM	MAXIMUM OPERATING PRESSURE	3000.0 POUNDS PER SQUARE INCH
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	OIL RESISTANT AND WEATHERPROOF
CRXX	MEASURING METHOD AND LENGTH	84.000 INCHES NOMINAL WORKING
CTCJ	FLANGE STYLE	DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON AND AIR AND WATER AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND
ABKU	FLANGE THICKNESS	0.560 INCHES NOMINAL 1ST END
ADUZ	CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.312 INCHES NOMINAL 2ND END
AFQN	FLANGE LENGTH	3.090 INCHES MINIMUM AND 3.160 INCHES MAXIMUM 2ND END
AGFF	FLANGE WIDTH	3.060 INCHES NOMINAL 1ST END
AHNX	BOLT HOLE DIAMETER	0.469 INCHES NOMINAL 1ST END
AKUT	END FLANGE CONSTRUCTION	SOLID 1ST END
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END
CQBD	BURST TEST PRESSURE	12000.0 POUNDS PER SQUARE INCH
CRFY	FLOW ANGLE	90.0 DEGREES 2ND END
CRWL	INSIDE SURFACE CONDITION	SMOOTH

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	051140 - Hose: noi tubing
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	846 - Fabricated nonmetallic materials