Buy AT-MR121T-15 Amplifier Computer part by Allied Telesis International Ltd

Part Number: AT-MR121T-15

Alternate P/N: ATMR121T15

Manufacturer: allied telesis international ltd

NSN: 7035-01-474-9537

NIIN: 014749537

Item Name : amplifier computer

CAGE Code: 0T156

FSC: 7035 ADP Support Equipment

INC Code: 03887

Country: USA

NCB Code: 01

FSG: 70 Automatic Data Processing Equipment Including Firmware Software Supplies and Support Equipment

We've received your request for AT-MR121T-15 (described as Amplifier Computer), manufactured by Allied Telesis International Ltd with CAGE code 0T156. This part is registered under NSN 7035-01-474-9537, classified in FSG 70 Automatic Data Processing Equipment Including Firmware Software Supplies and Support Equipment / FSC 7035 ADP Support Equipment. Our verification process will confirm traceability through supporting identifiers including NIIN 01-474-9537, NCB code 01 (origin: USA), and INC 03887. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your AT-MR121T-15 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AT-MR121T-15

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part AT-MR121T-15, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 7035-01-474-9537, 7035014749537

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	8.300 INCHES NOMINAL
ABMK	OVERALL WIDTH	4.400 INCHES NOMINAL
ACYN	AC VOLTAGE RATING	100.0 VOLTS MINIMUM AND 120.0 VOLTS MAXIMUM
AKWC	ELECTRICAL POWER SOURCE RELATIONSHIP	OPERATING
ABKW	OVERALL HEIGHT	1.300 INCHES NOMINAL
ACZB	FREQUENCY RATING	50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
FEAT	SPECIAL FEATURES	POWER CONSUMPTION 16 WATTS; OPERATING TEMP 0 TO 50 DEGC; STORAGE TEMP MINUS 20 TO 60 DEGC; INPUT AND OUTPUT IMPEDANCE 78 OHMS; COMPLIES TO IEEE802.3 STANDARD; POWER CORD INCLUDED

Identification

ADPE	Adp accessorial equipment. Represents accessorial equipment which is considered to be a component, device, or unit that is related directly to and essential in the operation of adpe. Included in this class are complete units and components of related general purpose accessorial equipment which are used as part of a system such as weapon system, control system, missile system, communications system, or navigational system. It also encompasses various units or devices and associated control units that are used in combination or conjuction with the adpe configuration but are not part of the configuration itself.
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	C - Represents items with emi sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.