We've received your request for 0E2058 (described as Felt Mechanical Pre), manufactured by Allis Chalmers Corp with CAGE code 92392. This part is registered under NSN 5330-00-534-7899, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-534-7899, NCB code 00 (origin: USA), and INC 18443. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 0E2058 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-534-7899 Item PartTypeName: FELT,MECHANICAL,PREFORMED | 5330 | 005347899 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 0E2058 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.265 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.188 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 1.062 INCHES NOMINAL |
| ADPW | OUTSIDE CORNER RADIUS | 0.375 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.375 INCHES NOMINAL |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.438 INCHES NOMINAL |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.375 INCHES NOMINAL |
| ADVN | CROSS-SECTIONAL HEIGHT | 0.625 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 4 |
| AQNE | JOINT TYPE | BUTT ONE SIDE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE F2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8484200000 (NAICS 339991) | Mechanical seals |
| SITC : 74920 | Gaskets and similar joints of metal sheeting combined with other materials or layers of metal; sets or assortments of gaskets and similar joints etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | J - 100.0 |
| LTL: | J - 100.0 |
| NMFC: | 194020 - Washers/gaskets/pckg dvc etc felt |
| SHC: | 5 - Low sensitivity, category iv, aa&e, unclassified |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
