Buy UG 1019 Adapter Connector part by Amphenol Corporation

Part Number:  UG 1019
Manufacturer:  amphenol corporation
NIIN:  005928105
Item Name :  adapter connector
CAGE Code:  77820
INC Code:  15091
Country:  USA
NCB Code:  00

We've received your request for UG 1019 (described as Adapter Connector), manufactured by Amphenol Corporation with CAGE code 77820. This part is registered under NSN 5935-00-592-8105, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-592-8105, NCB code 00 (origin: USA), and INC 15091. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your UG 1019 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for UG 1019

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part UG 1019, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number UG 1019 with NSN 5935-00-592-8105, 5935005928105

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-592-8105

Item PartTypeName:

ADAPTER,CONNECTOR

5935005928105P
CIICHCCESDPMICCriticalityENAC
S
Part NumberISCRNVCRNCCHCCMSDSSADC
11050125

Characteristics Data of NSN 5935-00-592-8105, 5935005928105

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A
AAQLBODY STYLESTRAIGHT SHAPE,EXTERNAL COUPLING
ABHPOVERALL LENGTH1.938 INCHES NOMINAL
ADAVOVERALL DIAMETER1.062 INCHES NOMINAL
AFQKDISTANCE FROM MOUNTING SHOULDER TO FRONT FACE1.062 INCHES NOMINAL
AFQQMOUNTING FACILITY THICKNESS0.250 INCHES NOMINAL
AFQRTHREADED DEVICE TYPECOUPLING FACILITY AND MOUNTING BUSHING
AFQWMATING END QUANTITY2
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS5000.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODMATING END
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
AFRYRADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC SINGLE MATING END
CSPTSHELL MATERIALCOPPER ALLOY
CSWMSHELL SURFACE TREATMENTSILVER
CTHHSHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE
CTKLINSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-19168 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCGINCLUDED CONTACT QUANTITY2 ALL MATING ENDS SINGLE CONTACT GROUPING
CXCJBUSHING ACCOMMODATION HOLE SHAPEROUND

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8548900100 (NAICS 335999) Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813 Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 5 - Low sensitivity, category iv, aa&e, unclassified
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015

asap_member

Aviation Suppliers Association Member

certified_company

FAA AC 0056B Accredited

as6081_supplier

AS 6081:2012 Certification

esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top