Buy 330-1853-010 Screw Externally Re part by Apollo Aerospace Components Llc

Part Number: 330-1853-010

Alternate P/N: 3301853010

Manufacturer: apollo aerospace components llc

NSN: 5305-01-380-0761

NIIN: 013800761

Item Name : screw externally re

CAGE Code: 51792

FSC: 5305 Screws

INC Code: 01852

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 330-1853-010 (described as Screw Externally Re), manufactured by Apollo Aerospace Components Llc with CAGE code 51792. This part is registered under NSN 5305-01-380-0761, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 01-380-0761, NCB code 01 (origin: USA), and INC 01852. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 330-1853-010 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 330-1853-010

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 330-1853-010, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 330-1853-010 with NSN 5305-01-380-0761, 5305013800761

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-380-0761 Item PartTypeName: SCREW,EXTERNALLY RELIEVED BODY	5305	013800761	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
330-1853-010	5	2	3

Characteristics Data of NSN 5305-01-380-0761, 5305013800761

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASB	FASTENER LENGTH	0.282 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
AASL	HEAD DIAMETER	0.143 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	CROSS RECESS TYPE II
CMLP	THREAD QUANTITY PER INCH	56
CSNG	EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
MATT	MATERIAL	STEEL COMP 303 OVERALL OR STEEL COMP 303SE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNC
AASA	THREAD LENGTH	0.109 INCHES NOMINAL
AASK	HEAD STYLE	FLAT COUNTERSUNK
AAWC	FIRST DIAMETER FROM HEAD	0.058 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
AAWH	DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.203 INCHES NOMINAL
AHYM	NOMINAL THREAD DIAMETER	0.086 INCHES
CRSQ	COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL

Schedule B & Trade

End Use : 12110	Iron and steel products, other
Schedule B : 7318152000 (NAICS 332722)	Bolts and bolts and their nuts or washers exported in the same shipment
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	12i2---
Quantity per pack	No qup
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	096640 - Screws, iron or steel
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware