Buy 4002 18 Stud Assembly Turnl part by Arconic Global Fasteners And Rings

Part Number: 4002 18

Manufacturer: arconic global fasteners and rings

NSN: 5325-00-298-7022

NIIN: 002987022

Item Name : stud assembly turnl

CAGE Code: 71286

FSC: 5325 Fastening Devices

INC Code: 18484

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 4002 18 (described as Stud Assembly Turnl), manufactured by Arconic Global Fasteners And Rings with CAGE code 71286. This part is registered under NSN 5325-00-298-7022, classified in FSG 53 Hardware and Abrasives / FSC 5325 Fastening Devices. Our verification process will confirm traceability through supporting identifiers including NIIN 00-298-7022, NCB code 00 (origin: USA), and INC 18484. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4002 18 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4002 18

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 4002 18, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 4002 18 with NSN 5325-00-298-7022, 5325002987022

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5325-00-298-7022 Item PartTypeName: STUD ASSEMBLY,TURNLOCK FASTENER	5325	002987022	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1142000-18	5	2	5

Characteristics Data of NSN 5325-00-298-7022, 5325002987022

MRC	Criteria	Characteristic
AGSM	MATERIAL ACCOMMODATED THICKNESS	0.561 INCHES MINIMUM AND 0.590 INCHES MAXIMUM
AKCV	DRIVE TYPE	SLOTTED
CQYY	STUD HEAD HEIGHT	0.098 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 1009 OR STEEL COMP 1050 OR STEEL COMP 1112 EYELET
MATT	MATERIAL	STEEL COMP 4037 STUD
MATT	MATERIAL	STEEL EJECTOR SPRING
MATT	MATERIAL	STEEL PIN
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
ABMZ	DIAMETER	0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM
ADQB	SECURING DEVICE TYPE	WASHER
AGRD	TURNLOCK STUD HEAD STYLE	STUD HEAD
AGRE	STUD ASSEMBLY STYLE	STUD ASSEMBLY
AGRF	DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD	0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM
AGRH	EYELET OUTSIDE DIAMETER	0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM
AGRK	EYELET LENGTH	0.257 INCHES NOMINAL

Schedule B & Trade

End Use : 12640	Finished textile supplies
Schedule B : 9607190000 (NAICS 339993)	Slide fasteners, nesoi
SITC : 89985	Slide fasteners

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Sf9sx-n
Quantity per pack	100
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	066440 - Fasteners curtain/snap metal
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware