Buy 1007062-1 Pin Shoulder Headle part by Armel Electronics Inc

Part Number: 1007062-1

Alternate P/N: 10070621

Manufacturer: armel electronics inc

NSN: 5315-01-355-3637

NIIN: 013553637

Item Name : pin shoulder headle

CAGE Code: 91663

FSC: 5315 Nails Keys and Pins

INC Code: 16749

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 1007062-1 (described as Pin Shoulder Headle), manufactured by Armel Electronics Inc with CAGE code 91663. This part is registered under NSN 5315-01-355-3637, classified in FSG 53 Hardware and Abrasives / FSC 5315 Nails Keys and Pins. Our verification process will confirm traceability through supporting identifiers including NIIN 01-355-3637, NCB code 01 (origin: USA), and INC 16749. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 1007062-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1007062-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 1007062-1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 1007062-1 with NSN 5315-01-355-3637, 5315013553637

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-01-355-3637 Item PartTypeName: PIN,SHOULDER,HEADLESS	5315	013553637	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1007062-1	5	2	3

Characteristics Data of NSN 5315-01-355-3637, 5315013553637

MRC	Criteria	Characteristic
AATR	SHANK LENGTH	0.295 INCHES NOMINAL
AAVH	SHOULDER DIAMETER	0.131 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
AKVA	SECOND END COUNTERBORE DEPTH	0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM
CQTR	SECOND SHANK DIAMETER	0.103 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CWAS	SECOND SHANK LENGTH	0.236 INCHES MINIMUM AND 0.240 INCHES MAXIMUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
ABHP	OVERALL LENGTH	0.568 INCHES NOMINAL
CRDY	FIRST END LOCATION	LONG END
MATT	MATERIAL	STEEL COMP 303 OR STEEL COMP 303SE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
AKTY	SECOND END COUNTERBORE DIAMETER	0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM
CQBB	SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM-A-582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
AAGZ	FIRST END STYLE	SQUARE
AAHP	SECOND END STYLE	COUNTERBORED W/O THRU HOLE
AAZE	SHANK DIAMETER	0.072 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
STYL	STYLE DESIGNATOR	SHOULDER

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.