Buy 51399S6T35MS Pin Quick Release part by Avdel Corp

Part Number: 51399S6T35MS

Manufacturer: avdel corp

NSN: 5315-01-012-0253

NIIN: 010120253

Item Name : pin quick release

CAGE Code: D2040

FSC: 5315 Nails Keys and Pins

INC Code: 08323

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 51399S6T35MS (described as Pin Quick Release), manufactured by Avdel Corp with CAGE code D2040. This part is registered under NSN 5315-01-012-0253, classified in FSG 53 Hardware and Abrasives / FSC 5315 Nails Keys and Pins. Our verification process will confirm traceability through supporting identifiers including NIIN 01-012-0253, NCB code 01 (origin: USA), and INC 08323. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 51399S6T35MS requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 51399S6T35MS

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 51399S6T35MS, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 51399S6T35MS with NSN 5315-01-012-0253, 5315010120253

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-01-012-0253 Item PartTypeName: PIN,QUICK RELEASE	5315	010120253		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
51399S6T35MS	5	2	3

Characteristics Data of NSN 5315-01-012-0253, 5315010120253

MRC	Criteria	Characteristic
AASN	HANDLE LENGTH	45.0 MILLIMETERS MINIMUM AND 47.0 MILLIMETERS MAXIMUM
AAZE	SHANK DIAMETER	5.92 MILLIMETERS MINIMUM AND 5.96 MILLIMETERS MAXIMUM
ABRM	DETENT QUANTITY	2
AFLW	ACTUATION METHOD	PUSH BUTTON
ANEE	GRIP LENGTH	35.0 MILLIMETERS MINIMUM AND 35.6 MILLIMETERS MAXIMUM
APCM	ACTUATION TYPE	PUSH
CQFM	HARDNESS RATING	58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM DETENT
CQSX	SHEAR STRENGTH	45940 DOUBLE POUNDS PER SQUARE INCH
CRQD	SHOULDER TO HEAD END DISTANCE	32.0 MILLIMETERS MAXIMUM
CTDJ	PIN ATTACHMENT TYPE	RING
CTXT	DETENT TO TAPERED END DISTANCE	6.0 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM
MATT	MATERIAL	ALUMINUM ALLOY 2017 BUTTON
MATT	MATERIAL	ALUMINUM ALLOY HANDLE
MATT	MATERIAL	STEEL OR STEEL COMP B1113 RING
MATT	MATERIAL	STEEL COMP 4130 SHANK
MATT	MATERIAL	STEEL COMP 4130 SPINDLE
MATT	MATERIAL	STEEL COMP 440C DETENT
MATT	MATERIAL	STEEL SPRING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHANK
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SPINDLE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-591 FED SPEC SINGLE MATERIAL RESPONSE HANDLE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-633 FED SPEC 2ND MATERIAL RESPONSE RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE SPRING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-763 FED SPEC SINGLE MATERIAL RESPONSE DETENT
SFTT	SURFACE TREATMENT	ANODIZE BUTTON
SFTT	SURFACE TREATMENT	ANODIZE HANDLE
SFTT	SURFACE TREATMENT	CADMIUM RING
SFTT	SURFACE TREATMENT	CADMIUM SHANK
SFTT	SURFACE TREATMENT	CADMIUM SPINDLE
SFTT	SURFACE TREATMENT	CADMIUM SPRING
SFTT	SURFACE TREATMENT	PASSIVATE DETENT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BUTTON
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE DETENT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SHANK
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SPINDLE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SPRING
STYL	STYLE DESIGNATOR	T HANDLE

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	Q - 70.0
LTL:	Q - 70.0
NMFC:	095190 - Hardware, noi sub 9
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware