We've received your request for X21-572-624 (described as Elbow Electrical Co), manufactured by Bae Systems Bofors Ab with CAGE code S3712. This part is registered under NSN 5975-01-117-3266, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-117-3266, NCB code 01 (origin: USA), and INC 06944. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your X21-572-624 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5975-01-117-3266 Item PartTypeName: ELBOW,ELECTRICAL CONDUIT | 5975 | 011173266 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10351624 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 0.938 INCHES NOMINAL FIRST END |
| ABEX | DEFLECTION ANGLE | 45.0 DEGREES |
| AELS | CONDUIT TYPE ACCOMMODATED | ANY ACCEPTABLE SINGLE END |
| APTD | END TYPE | COMPRESSION RING AND NUT FIRST END |
| APTD | END TYPE | INTERNAL THREAD SECOND END |
| CQMQ | LEG END TO PLANE OF BEND DISTANCE | 0.580 INCHES NOMINAL SECOND END |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| STYL | STYLE DESIGNATOR | COMPRESSION |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7609000000 (NAICS 332919) | Aluminum tube or pipe fittings (couplings, elbows sleeves) |
| SITC : 68427 | Aluminum and aluminum alloy tube and pipe fittings (e.G. Couplings, elbows and sleeves) |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | P - 77.5 |
| LTL: | P - 77.5 |
| NMFC: | 061680 - Elec wiring plugs etc sub2 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
