We've received your request for 113B3782P1 (described as Gasket), manufactured by Bae Systems Controls Inc with CAGE code 89954. This part is registered under NSN 5330-00-998-3886, classified in FSG 53 Hardware and Abrasives / FSC 5330 Packing and Gasket Materials. Our verification process will confirm traceability through supporting identifiers including NIIN 00-998-3886, NCB code 00 (origin: USA), and INC 04522. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 113B3782P1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-998-3886 Item PartTypeName: GASKET | 5330 | 009983886 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 113B3782P1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| AAUB | HOLE DIAMETER | 0.125 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.580 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.165 INCHES NOMINAL |
| ADUE | APERTURE WIDTH | 1.800 INCHES NOMINAL |
| ADUF | APERTURE LENGTH | 2.200 INCHES NOMINAL |
| ADUP | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.115 INCHES NOMINAL |
| ADUQ | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.115 INCHES NOMINAL |
| ADUR | INSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.195 INCHES NOMINAL |
| ADUS | INSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.195 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.800 INCHES NOMINAL |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.200 INCHES NOMINAL |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.183 INCHES NOMINAL |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.190 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.032 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 4 |
| CQFM | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL OVERALL |
| MATT | MATERIAL | STEEL COMP 1006 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-405 COMP 1006 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ZZZV | FSC APPLICATION DATA | COMPUTERS RANGE,AIRCRAFT GUNNERY FIRE CONTROL |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9ay-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | J - 100.0 |
| LTL: | J - 100.0 |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi sub6 |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 596 - Gaskets, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
