Buy 635011-01 Transformer Power part by Bae Systems Controls Inc

Part Number:  635011-01
Alternate P/N:  63501101
Manufacturer:  bae systems controls inc
NIIN:  013735035
Item Name :  transformer power
CAGE Code:  07690
INC Code:  32496
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 635011-01 (described as Transformer Power), manufactured by Bae Systems Controls Inc with CAGE code 07690. This part is registered under NSN 5950-01-373-5035, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-373-5035, NCB code 01 (origin: USA), and INC 32496. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 635011-01 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 635011-01

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 635011-01, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 635011-01 with NSN 5950-01-373-5035, 5950013735035

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-01-373-5035

Item PartTypeName:

TRANSFORMER,POWER

59500137350350P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
635011-01521

Characteristics Data of NSN 5950-01-373-5035, 5950013735035

MRCCriteriaCharacteristic
POWERABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1 000 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
POWERADAQBODY LENGTH1 550 INCHES NOMINAL
POWERADATBODY WIDTH1 400 INCHES NOMINAL
POWERAKPVMOUNTING FACILITY QUANTITY2 SINGLE GROUP
POWERBPLCWINDING FUNCTION AND QUANTITY2 PRIMARY SINGLE COMPONENT AND 2 SECONDARY SINGLE COMPONENT
POWERCWJSWINDING OPERATING VOLTAGE104 00 AC VOLTS MAXIMUM SINGLE COMPONENT 1ST SECONDARY
POWERTTQYTERMINAL TYPE AND QUANTITY15 PIN
POWERACZXWINDING SHIELDING METHODINTERNAL SHIELD BROUGHT OUT TO TERMINAL SINGLE COMPONENT
POWERAKNAINCLOSURE TYPEOPEN
POWERCQJXNOMINAL THREAD SIZE0 112 INCHES SINGLE GROUP
POWERTHSDTHREAD SERIES DESIGNATORUNC SINGLE GROUP
POWERAARGRELIABILITY INDICATORNOT ESTABLISHED
POWERADAUBODY HEIGHT1 550 INCHES NOMINAL
POWERAXGYMOUNTING METHODTHREADED HOLE SINGLE GROUP
POWERTESTTEST DATA DOCUMENT07690-635011 DRAWING THIS IS THE BASIC GOVERNING DRAWING SUCH AS A CONTRACTOR DRAWING ORIGINAL EQUIPMENT MANUFACTURER DRAWING ETC EXCLUDES ANY SPECIFICATION STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
POWERACZBFREQUENCY RATING49 0 KILOHERTZ MINIMUM ALL COMPONENTS AND 51 0 KILOHERTZ MAXIMUM ALL COMPONENTS
POWERACZCINPUT-OUTPUT PHASE RELATIONSHIPSINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
POWERCRBZWINDING OPERATING CURRENT1 5 AMPERES AC MAXIMUM SINGLE COMPONENT 2ND SECONDARY

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top