Buy 330541 Synchro Control Tra part by Bae Systems Inc

Part Number: 330541

Manufacturer: bae systems inc

NSN: 5990-00-903-8672

NIIN: 009038672

Item Name : synchro control tra

CAGE Code: 80249

FSC: 5990 Synchros and Resolvers

INC Code: 15289

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 330541 (described as Synchro Control Tra), manufactured by Bae Systems Inc with CAGE code 80249. This part is registered under NSN 5990-00-903-8672, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-903-8672, NCB code 00 (origin: USA), and INC 15289. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 330541 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 330541

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 330541, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 330541 with NSN 5990-00-903-8672, 5990009038672

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-903-8672 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER	5990	009038672		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2323-1C	C	2	5

Characteristics Data of NSN 5990-00-903-8672, 5990009038672

MRC	Criteria	Characteristic
ABKU	FLANGE THICKNESS	0.2500 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.2032 INCHES MINIMUM AND 0.2035 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.6250 INCHES NOMINAL SINGLE SHAFT
AEBZ	SCHEMATIC DIAGRAM DESIGNATOR	1 Y-ROTOR,1 STATOR
AJSL	BODY SIZE	23
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	90.0 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	24.0 MILLIAMPERES NOMINAL
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	580.0 MILLIWATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	60.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	596.00 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	667.00 NOMINAL
AJTA	ZRS RESISTANCE IN OHMS	850.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	435.00 NOMINAL
AJTT	STATOR DC RESISTANCE IN OHMS	465.00 NOMINAL
AJVF	PHASE SHIFT ANGLE IN DEG	14.000 INPUT TO OUTPUT NOMINAL
AJVH	MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	60.00
AJWH	SHAFT END PLAY	0.0150 INCHES MAXIMUM
AJWR	SHOULDER LENGTH	0.1480 INCHES MINIMUM AND 0.1520 INCHES MAXIMUM
AJWY	SECOND SHOULDER FACE TO REAR FLANGE DISTANCE	1.7000 INCHES NOMINAL
AJXB	SHAFT MAXIMUM RUNOUT	0.0020 INCHES
AJYY	SHAFT THREAD SERIES DESIGNATOR	UNF SINGLE SHAFT
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
AKAN	SHAFT THREAD CLASS	3A SINGLE SHAFT
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	930.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0450 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	2030.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0350 INCHES NOMINAL SINGLE SHAFT
CRKL	PLUS J ZRS REACTANCE IN OHMS	310.00 NOMINAL
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	0.720 ROTOR TO STATOR MINIMUM AND 0.750 ROTOR TO STATOR MAXIMUM
CWBH	SHAFT NOMINAL THREAD SIZE	0.1900 INCHES SINGLE SHAFT
CWYF	SHAFT END PLAY DETERMINING WEIGHT	48.0 OUNCES
TTQY	TERMINAL TYPE AND QUANTITY	5 SCREW
AAVH	SHOULDER DIAMETER	1.0620 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.6100 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM
AAZW	SECOND SHOULDER DIAMETER	1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM
AAZX	SECOND SHOULDER LENGTH	0.0625 INCHES NOMINAL
ABHP	OVERALL LENGTH	3.9730 INCHES MAXIMUM

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9n-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)