Buy 100-3785-1 Resolver Electrical part by Behlman Electronics Inc

Part Number: 100-3785-1

Alternate P/N: 10037851

Manufacturer: behlman electronics inc

NSN: 5990-01-146-9113

NIIN: 011469113

Item Name : resolver electrical

CAGE Code: 12868

FSC: 5990 Synchros and Resolvers

INC Code: 22966

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 100-3785-1 (described as Resolver Electrical), manufactured by Behlman Electronics Inc with CAGE code 12868. This part is registered under NSN 5990-01-146-9113, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-146-9113, NCB code 01 (origin: USA), and INC 22966. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 100-3785-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 100-3785-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 100-3785-1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 100-3785-1 with NSN 5990-01-146-9113, 5990011469113

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-01-146-9113 Item PartTypeName: RESOLVER,ELECTRICAL	5990	011469113	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
100-3785-1	5	2	5

Characteristics Data of NSN 5990-01-146-9113, 5990011469113

MRC	Criteria	Characteristic
AAFZ	BODY MATERIAL	ALUMINUM
AAQL	BODY STYLE	STANDARD ROUND A
AAVL	PILOT DIAMETER	0.6250 INCHES NOMINAL
ABHP	OVERALL LENGTH	2.3270 INCHES NOMINAL
ABKK	FLANGE DIAMETER	1.0620 INCHES NOMINAL
ABKU	FLANGE THICKNESS	0.0930 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	1.0000 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0500 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.1248 INCHES NOMINAL SINGLE SHAFT
ABXF	SHAFT LENGTH	0.5000 INCHES NOMINAL SINGLE SHAFT
AJSL	BODY SIZE	11
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	60.0 MAXIMUM
AJSP	STATOR INPUT CURRENT RATING	6.6 MILLIAMPERES MAXIMUM
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	550.00 NOMINAL
AJSY	ZSO RESISTANCE IN OHMS	500.00 NOMINAL
AJTC	ZSS RESISTANCE IN OHMS	585.00 NOMINAL
AJTS	ROTOR DC RESISTANCE IN OHMS	293.00 MINIMUM AND 397.00 MAXIMUM
AJTT	STATOR DC RESISTANCE IN OHMS	255.00 MINIMUM AND 345.00 MAXIMUM
AJTX	COMPENSATION METHOD	WINDING COMPENSATED
AJVC	COMPENSATOR DC RESISTANCE IN OHMS	323.00 MINIMUM AND 437.00 MAXIMUM
AJVD	COMPENSATOR TRANSFORMATION RATIO IN PERCENT	0.960 ROTOR TO COMPENSATOR MINIMUM AND 1.040 ROTOR TO COMPENSATOR MAXIMUM
AJVF	PHASE SHIFT ANGLE IN DEG	7.500 INPUT TO OUTPUT NOMINAL
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	60.00 OUTPUT
AJVJ	INTERAXIS ERROR ANGULAR RANGE IN MINUTES	-10.0 TO 10.0
AJWQ	PILOT LENGTH	0.0620 INCHES NOMINAL
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.7650 INCHES NOMINAL
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	2300.00 NOMINAL
CQZS	SHAFT SLOT DEPTH	0.0300 INCHES NOMINAL SINGLE SHAFT
CRGZ	PLUS J ZSO REACTANCE IN OHMS	2200.00 NOMINAL
CRHN	SHAFT SLOT WIDTH	0.0250 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSFG	PLUS J ZSS REACTANCE IN OHMS	240.00 NOMINAL
CSJY	TRANSFORMATION RATIO	0.960 ROTOR TO STATOR MINIMUM AND 1.040 ROTOR TO STATOR MAXIMUM
TTQY	TERMINAL TYPE AND QUANTITY	11 WIRE LEAD

Schedule B & Trade

End Use : 21610	Medicinal equipment
Schedule B : 9018903000 (NAICS 339112)	Anesthetic instruments and appliances and parts and accessories
SITC : 87229	Instruments and appliances used in medical, surgical or veterinary sciences, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9eh-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)