Buy 214240 Bushing Sleeve part by Bendix Commercial Vehicle Systems

Part Number: 214240

Manufacturer: bendix commercial vehicle systems

NSN: 3120-00-616-6442

NIIN: 006166442

Item Name : bushing sleeve

CAGE Code: 06853

FSC: 3120 Bearings Plain Unmounted

INC Code: 13206

Country: USA

NCB Code: 00

FSG: 31 Bearings

We've received your request for 214240 (described as Bushing Sleeve), manufactured by Bendix Commercial Vehicle Systems with CAGE code 06853. This part is registered under NSN 3120-00-616-6442, classified in FSG 31 Bearings / FSC 3120 Bearings Plain Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 00-616-6442, NCB code 00 (origin: USA), and INC 13206. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 214240 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 214240

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 214240, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 214240 with NSN 3120-00-616-6442, 3120006166442

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-00-616-6442 Item PartTypeName: BUSHING,SLEEVE	3120	006166442		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
214240	2	2	5

Characteristics Data of NSN 3120-00-616-6442, 3120006166442

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	1.7500 INCHES NOMINAL
ADAS	BODY INSIDE DIAMETER	0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
AEPR	FLANGE OUTSIDE DIAMETER	1.1250 INCHES NOMINAL
AGFF	FLANGE WIDTH	0.0625 INCHES NOMINAL
AJFM	END TO FLANGE DISTANCE	0.5938 INCHES NOMINAL
BZLX	CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
BZLX	CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE CENTER FLANGE LEFT BODY CORNER
BZLX	CORNER SHAPE	SQUARE CENTER FLANGE OUTSIDE LEFT CORNER
BZLX	CORNER SHAPE	SQUARE CENTER FLANGE OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE CENTER FLANGE RIGHT BODY CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
CSYM	SURFACE FINISH	125.0 MICROINCHES INTERMEDIATE LAYER
MATT	MATERIAL	COPPER ALLOY 280 OVERALL
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482997060 (NAICS 332991)	Parts, nesoi, for cylindrical roller bearings, nesoi
SITC : 74699	Parts of ball and roller bearings, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	W - Rating variable
LTL:	P - 77.5
NMFC:	114870 - Bearing/bushing metal
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings