We've received your request for 9M702-5B3 (described as Clamp Block Section), manufactured by Boeing Company The with CAGE code 76301. This part is registered under NSN 5340-01-501-4585, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 01-501-4585, NCB code 01 (origin: USA), and INC 39404. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 9M702-5B3 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-501-4585 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 015014585 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9M702-5B3 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.469 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MATT | MATERIAL | PLASTIC |
| BYGG | BLOCK HEIGHT | 0.630 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 4 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 1.062 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.186 INCHES NOMINAL |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 2.311 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.2875 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | NYLON, GLASS FILLED PER P.S. 14280, GRADE B, CLASS 2 |
| ABMK | OVERALL WIDTH | 0.575 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.311 INCHES NOMINAL |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 3.591 INCHES NOMINAL |
| CWWM | CLAMPING HOLE DIAMETER | 0.766 INCHES NOMINAL ALL HOLES |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, BLOCK - TUBE SUPPORT, PLASTIC |
| SUPP | SUPPLEMENTARY FEATURES | A QUANTITY OF TWO BLOCKS MUST BE SPECIFIED FOR EACH INSTALLATION (TOP AND BOTTOM) |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| ABHP | OVERALL LENGTH | 4.529 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature but does have other critical featur (s) such as tolerance, fit restrictions or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9bqe--9 |
| Quantity per pack | No qup |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | W - Rating variable |
| LTL: | W - Rating variable |
| NMFC: | 011790 - Aircraft parts noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
