Buy 7735280 Motor Direct Curren part by Bogue Systems Inc

Part Number:  7735280
Manufacturer:  bogue systems inc
NIIN:  007727524
Item Name :  motor direct curren
CAGE Code:  0BXF1
INC Code:  16350
Country:  USA
NCB Code:  00
FSG:  61 Electric Wire and Power and Distribution Equipment

We've received your request for 7735280 (described as Motor Direct Curren), manufactured by Bogue Systems Inc with CAGE code 0BXF1. This part is registered under NSN 6105-00-772-7524, classified in FSG 61 Electric Wire and Power and Distribution Equipment / FSC 6105 Motors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-772-7524, NCB code 00 (origin: USA), and INC 16350. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 7735280 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7735280

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 7735280, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 7735280 with NSN 6105-00-772-7524, 6105007727524

NSNFSCNIINCLSHazmatDEMILCancelled NSN
6105-00-772-7524

Item PartTypeName:

MOTOR,DIRECT CURRENT

61050077275240N
CIICHCCESDPMICCriticalityENAC
Z A0
Part NumberISCRNVCRNCCHCCMSDSSADC
2540007727524596

Characteristics Data of NSN 6105-00-772-7524, 6105007727524

MRCCriteriaCharacteristic
AAJTOVERALL HEIGHT5.620 INCHES
AAJVOVERALL WIDTH5.620 INCHES
CNMKWOODRUFF KEY SIZE DESIGNATION405 SINGLE END
CWCSLENGTH OF SHAFT FROM HOUSING2.120 INCHES SINGLE END
CWFXROTOR SPEED RATING IN RPM5800.0 SINGLE NO LOAD
CWGLCURRENT RATING IN AMPS55.000 SINGLE INPUT
CWHZSHAFT END CHARACTERISTICA11 SINGLE STYLE SINGLE END
TTQYTERMINAL TYPE AND QUANTITY1 RECEPTACLE
AAJDTHREAD CLASS2A SINGLE END
AAJFTHREAD DIRECTIONRIGHT-HAND SINGLE END
AAJUOVERALL LENGTH13.000 INCHES
ABWVSHAFT DIAMETER0.562 INCHES NOMINAL SINGLE END
AKCTSHAFT ROTATION DIRECTIONCOUNTERCLOCKWISE SINGLE END
AKPSDUTY CYCLECONTINUOUS
ANPZENCLOSURE FEATUREWATERPROOF
AXCPWINDING TYPEPERMANENT MAGNET
AXGYMOUNTING METHODFLANGE
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE
BFMFCOOLING METHODAIR TO AIR COOLED
BFMRKEYWAY CENTER TO SHAFT END DISTANCE1.370 INCHES NOMINAL SINGLE END
BKPBCURRENT RATING METHODLOAD
CMLPTHREAD QUANTITY PER INCH20 SINGLE END
CNXSPOWER RATING1.500 HORSEPOWER INPUT
CQJXNOMINAL THREAD SIZE0.500 INCHES SINGLE END
CWGQCONNECTION TYPE AND VOLTAGE RATING IN VOLTS27.5 LINE TO NEUTRAL SINGLE INPUT
THSDTHREAD SERIES DESIGNATORUNF SINGLE END

Schedule B & Trade

End Use : 21100 Industrial engines
Schedule B : 8501322000 (NAICS 335312) Dc motors of an output exceeding 750 w but not exceeding 14.92 kw
SITC : 71620 Electric motors of an output exceeding 37.5 w and generators, dc

Identification

ADPE Represents items with no adp components
CRITL The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC C
Classification Control Z
MGMT_CTL 2242---
Quantity per pack 1
Repariability When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level.
Shelf Life N/A
SOS Mpb
Unit of Measure Ea

Freight Information

ACC: V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 115030 - Blowers, or centrifugal fans
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top