We've received your request for C4FM1573-1 (described as Washer Shouldered A), manufactured by Bombardier Aerospace with CAGE code 71867. This part is registered under NSN 5310-00-411-4783, classified in FSG 53 Hardware and Abrasives / FSC 5310 Nuts and Washers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-411-4783, NCB code 00 (origin: USA), and INC 15935. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your C4FM1573-1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-411-4783 Item PartTypeName: WASHER,SHOULDERED AND RECESSED | 5310 | 004114783 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| C4FM1573-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.440 INCHES NOMINAL |
| AAVH | SHOULDER DIAMETER | 0.744 INCHES MINIMUM AND 0.748 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.980 INCHES NOMINAL |
| ABMD | RECESS DIAMETER | 0.900 INCHES NOMINAL |
| ABMG | SHOULDER HEIGHT | 0.160 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.215 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| CSTM | RECESS ANGLE | 100.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | SURFACE OPPOSITE SHOULDER RECESSED |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDERED AND RECESSED |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7616108000 (NAICS 332722) | Cotters, cotter-pins, washers and similar articles, of aluminum |
| SITC : 69440 | Nails, tacks, staples (excluding staples in strips for office etc. Use), screws, bolts, nuts, rivets, washers and similar articles, of aluminum |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | U - 50.0 |
| LTL: | U - 50.0 |
| NMFC: | 194160 - Washer or gaskets, iron or steel, |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
