Buy 236P1503 Resistor Variable W part by Bourns Instruments Inc

Part Number:  236P1503
Manufacturer:  bourns instruments inc
NIIN:  007998412
Item Name :  resistor variable w
CAGE Code:  80294
INC Code:  37406
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 236P1503 (described as Resistor Variable W), manufactured by Bourns Instruments Inc with CAGE code 80294. This part is registered under NSN 5905-00-799-8412, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-799-8412, NCB code 00 (origin: USA), and INC 37406. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 236P1503 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 236P1503

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 236P1503, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 236P1503 with NSN 5905-00-799-8412, 5905007998412

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-799-8412

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050079984120NB
CIICHCCESDPMICCriticalityENAC
UBA0
Part NumberISCRNVCRNCCHCCMSDSSADC
2020084P12513

Characteristics Data of NSN 5905-00-799-8412, 5905007998412

MRCCriteriaCharacteristic
ABWVSHAFT DIAMETER0.120 INCHES NOMINAL
ABXFSHAFT LENGTH0.066 INCHES NOMINAL
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION7200.0 MINIMUM
AYQRCENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.100 INCHES NOMINAL
CQCCELECTRICAL RESISTANCE PER SECTION50.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG7200.0 MINIMUM
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-50.0 TO 50.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.8 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECLUTCH
TTQYTERMINAL TYPE AND QUANTITY3 PIN
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.406 INCHES NOMINAL
ABJTTERMINAL LENGTH0.500 INCHES NOMINAL
ABKWOVERALL HEIGHT0.860 INCHES NOMINAL
ABMKOVERALL WIDTH0.234 INCHES MINIMUM AND 0.298 INCHES MAXIMUM
ABTBMOUNTING HOLE DIAMETER0.086 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
ADAQBODY LENGTH1.340 INCHES NOMINAL
ADATBODY WIDTH0.234 INCHES MINIMUM AND 0.298 INCHES MAXIMUM
ADAUBODY HEIGHT0.360 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE7.50 INCH-OUNCES
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
AKPVMOUNTING FACILITY QUANTITY2
APXHTERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
AXGYMOUNTING METHODUNTHREADED HOLE
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER135.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
ZZZYREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSQUALITY CONTROLLED FOR POLARIS

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q22rzx-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top