Buy 126-222 Connector Plug Elec part by Bunker Ramo Corp

Part Number:  126-222
Alternate P/N:  126222
Manufacturer:  bunker ramo corp
NIIN:  006605487
Item Name :  connector plug elec
CAGE Code:  96791
INC Code:  01938
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 126-222 (described as Connector Plug Elec), manufactured by Bunker Ramo Corp with CAGE code 96791. This part is registered under NSN 5935-00-660-5487, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-660-5487, NCB code 00 (origin: USA), and INC 01938. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 126-222 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 126-222

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 126-222, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 126-222 with NSN 5935-00-660-5487, 5935006605487

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5935-00-660-5487

Item PartTypeName:

CONNECTOR,PLUG,ELECTRICAL

59350066054870PA
CIICHCCESDPMICCriticalityENAC
UAG
Part NumberISCRNVCRNCCHCCMSDSSADC
1089-4FW21CA

Characteristics Data of NSN 5935-00-660-5487, 5935006605487

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAQLBODY STYLESTRAIGHT SHAPE,INTERNAL COUPLING W/STRAIN RELIEF
ADAQBODY LENGTH0.891 INCHES NOMINAL
ADAVOVERALL DIAMETER0.750 INCHES NOMINAL
AFQJCABLE ENTRANCE DIAMETER0.297 INCHES MAXIMUM
AFQRTHREADED DEVICE TYPECOUPLING FACILITY
AFQWMATING END QUANTITY1
AFQZCONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
AFRCCONTACT MAXIMUM CURRENT RATING IN AMPS7.5 SINGLE MATING END SINGLE CONTACT GROUPING
AFRDCONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END SINGLE CONTACT GROUPING
AFRNPOLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
AFRPINSERT POSITION IN DEG0.0
AFRTSHELL TYPESOLID
AFRVCONNECTOR LOCKING METHODINTERNALLY THREADED COUPLING NUT
AFRWCONNECTOR CABLE STRAIN RELIEF METHODCABLE CLAMP
CMLPTHREAD QUANTITY PER INCH20
CQJXNOMINAL THREAD SIZE0.500 INCHES
CQTMTERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
CQTZCONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CQYHCONTACT SURFACE TREATMENTGOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
CQZGINSERT MATERIALPLASTIC DIALLYL PHTHALATE SINGLE MATING END
CSCFTERMINAL TYPESOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
CSPTSHELL MATERIALIRON
CSWMSHELL SURFACE TREATMENTNICKEL
CXCGINCLUDED CONTACT QUANTITY9 SINGLE MATING END SINGLE CONTACT GROUPING
CXCLINCLUDED CONTACT TYPEROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
PMWTPRECIOUS MATERIAL AND WEIGHT0.009 GOLD GRAINS,TROY AND 0.009 SILVER GRAINS,TROY
PRMTPRECIOUS MATERIALGOLD AND SILVER
THSDTHREAD SERIES DESIGNATORUNF

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536695050 (NAICS 335931) Electrical plugs & sockets, for a voltage not exceeding 1, 000 v, nesoi
SITC : 77258 Electric plugs and sockets, for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC G - Item contains gold.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Q22scx-
Quantity per pack 1
Repariability Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061680 - Elec wiring plugs etc
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top