We've received your request for CEC4781 (described as Gasket), manufactured by C E Conover And Co Inc with CAGE code 07060. This part is registered under NSN 5330-01-015-9699, classified in FSG 53 Hardware and Abrasives / FSC 5330 Packing and Gasket Materials. Our verification process will confirm traceability through supporting identifiers including NIIN 01-015-9699, NCB code 01 (origin: USA), and INC 04522. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your CEC4781 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-01-015-9699 Item PartTypeName: GASKET | 5330 | 010159699 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 40526 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 5.970 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 1.910 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.177 INCHES NOMINAL |
| ADWF | GAGE RING THICKNESS | 0.125 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 16 |
| ANYN | ELONGATION PERCENTAGE | 125 MAXIMUM |
| CQFM | HARDNESS RATING | 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL |
| CTQW | MAXIMUM PRESSURE RATING | 42000.0 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 AND RUBBER FLUOROCARBON CLASS FPM OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 ALLOY 6061 TEMPER T6 FED SPEC 1ST MATERIAL RESPONSE AND MIL-R-83248 TY 1 CL 1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9sx-v |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | U - 50.0 |
| NMFC: | 194160 - Washer or gaskets, iron or steel, |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
