We've received your request for 5D505 (described as Seal Plain Encased), manufactured by Caterpillar Inc with CAGE code 11083. This part is registered under NSN 5330-00-999-8367, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-999-8367, NCB code 00 (origin: USA), and INC 04214. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 5D505 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-999-8367 Item PartTypeName: SEAL,PLAIN ENCASED | 5330 | 009998367 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 455566K61 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABJH | TEMP RATING | -60.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT |
| ABVM | ACCOMMODATED SHAFT DIAMETER | 3.232 INCHES NOMINAL |
| ADUC | SEAL WIDTH | 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| AEAT | ACCOMMODATED SHAFT MAXIMUM RATED SPEED | 150 FEET PER MINUTE |
| BHHL | CASE STYLE | SQUARE |
| CPCW | HOUSING BORE DIAMETER | 4.126 INCHES NOMINAL |
| CTQC | SEALING ELEMENT STYLE | VERTICAL |
| MATT | MATERIAL | RUBBER SYNTHETIC SEALING ELEMENT |
| MATT | MATERIAL | STEEL CASE |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8484200000 (NAICS 339991) | Mechanical seals |
| SITC : 74920 | Gaskets and similar joints of metal sheeting combined with other materials or layers of metal; sets or assortments of gaskets and similar joints etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
