We've received your request for D7FWR (described as Tractor Full Tracke), manufactured by Caterpillar Inc with CAGE code 11083. This part is registered under NSN 2410-00-185-9792, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-185-9792, NCB code 00 (origin: USA), and INC 14223. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your D7FWR requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2410-00-185-9792 Item PartTypeName: TRACTOR,FULL TRACKED,LOW SPEED | 2410 | 001859792 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D7FWR | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AXJD | TRANSMISSION TYPE | POWER SHIFT |
| AZBG | ENGINE TYPE | DIESEL |
| CHYP | GROUND TRACK LENGTH | 107.000 INCHES NOMINAL |
| CJBJ | ATTACHMENT NOMENCLATURE AND QUANTITY | BULLDOZER,EARTH MOVING,HYDRAULIC OPERATED,TILTING TYPE,OUTSIDE TRACK FRAME MTD W/BACK RIP SCARIFIER TEETH,1; WINCH,REVERSIBLE TYPE,REAR MTD,1 DRUM,1 |
| CJJS | DRAWBAR PULL | 30000.0 POUNDS MINIMUM AND 38740.0 POUNDS MAXIMUM |
| CJKW | VEHICLE TRACK GAGE | 78.000 INCHES |
| CJKX | TRACK TYPE | OSCILLATING |
| CJKY | TRACK SHOE TYPE | GROUSER |
| CJKZ | GROUSER TYPE | INTEGRAL |
| FEAT | SPECIAL FEATURES | EQUIPPED W/ROLL-OVER PROTECTION BARS |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY ATTACHMENT NOMENCLATURE AND QUANTITY,AND SPECIAL FEATURES |
| End Use : 21030 | Excavating machinery |
|---|---|
| Schedule B : 8429190010 (NAICS 333120) | Bulldozers and angledozers, self-propelled, new, except track laying |
| SITC : 72311 | Bulldozers and angledozers, self-propelled |
| CRITL | The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input). |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | B |
|---|---|
| Classification Control | U |
| MGMT_CTL | Kq1ian- |
| Quantity per pack | No qup |
| Repariability | When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level. |
| Shelf Life | N/A |
| SOS | Akz |
| Unit of Measure | Ea |
| ACC: | E - Engineer supplies, other than those listed under code b. |
|---|---|
| ADC: | Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions. |
| LCL: | J - 100.0 |
| LTL: | J - 100.0 |
| NMFC: | 122420 - Tractors and attachments combined |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 885 - Vehicles, mhe, road construction, repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
