Buy 2602-000 Filter High Pass part by Cdi Industries Inc

Part Number:  2602-000
Alternate P/N:  2602000
Manufacturer:  cdi industries inc
NIIN:  010959832
Item Name :  filter high pass
CAGE Code:  32186
INC Code:  13910
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 2602-000 (described as Filter High Pass), manufactured by Cdi Industries Inc with CAGE code 32186. This part is registered under NSN 5915-01-095-9832, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-095-9832, NCB code 01 (origin: USA), and INC 13910. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 2602-000 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2602-000

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 2602-000, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 2602-000 with NSN 5915-01-095-9832, 5915010959832

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-095-9832

Item PartTypeName:

FILTER,HIGH PASS

59150109598320P
CIICHCCESDPMICCriticalityENAC
U S
Part NumberISCRNVCRNCCHCCMSDSSADC
2602595

Characteristics Data of NSN 5915-01-095-9832, 5915010959832

MRCCriteriaCharacteristic
ADAQBODY LENGTH3.344 INCHES NOMINAL
ADATBODY WIDTH1.531 INCHES NOMINAL
ADAUBODY HEIGHT0.766 INCHES NOMINAL
AHAJREFERENCE FREQUENCY PER FUNCTION312.5 MEGAHERTZ BLANK
AHAUINPUT IMPEDANCE PER FUNCTION W/LOAD50.0 OHMS BLANK
AHAVOUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT50.0 OHMS BLANK
AHBNINPUT TERMINAL MANUFACTURER CODE32186
AHBPINPUT TERMINAL IDENTIFICATIONTNC
AHBSOUTPUT TERMINAL MANUFACTURER CODE32186
AHBTOUTPUT TERMINAL IDENTIFICATIONTNC
AHBZVOLTAGE STANDING WAVE RATIO PER FUNCTION1.5 BLANK
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
AKNAINCLOSURE TYPEENCASED
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS0.5 BLANK
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE INPUT 1ST FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE OUTPUT 2ND FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION100.00 MEGAHERTZ BLANK AND 150.00 MEGAHERTZ BLANK AND 225.00 MEGAHERTZ BLANK AND 400.00 MEGAHERTZ BLANK
CQJXNOMINAL THREAD SIZE0.112 INCHES
CQRGBODY MATERIALMETAL
CRBBFREQUENCY BAND WIDTH PER FUNCTION225.00 MEGAHERTZ BLANK AND 400.00 MEGAHERTZ BLANK
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS50.0 MINIMUM BLANK AND 1.0 MAXIMUM BLANK 1ST FUNCTION
CRBNVOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION225.0 MEGAHERTZ BLANK AND 400.0 MEGAHERTZ BLANK
CRSTBODY SURFACE TREATMENTSILVER
PMLCPRECIOUS MATERIAL AND LOCATIONEXTERNAL SURFACES SILVER
PRMTPRECIOUS MATERIALSILVER
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

NSN Management Codes

AAC X
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061400 - Condensers/parts noi/capacitors
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top