Buy R1602 Filter Low Pass part by Cen Electronics

Part Number: R1602

Manufacturer: cen electronics

NSN: 5915-00-950-4307

NIIN: 009504307

Item Name : filter low pass

CAGE Code: 08715

FSC: 5915 Filters and Networks

INC Code: 13911

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for R1602 (described as Filter Low Pass), manufactured by Cen Electronics with CAGE code 08715. This part is registered under NSN 5915-00-950-4307, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 00-950-4307, NCB code 00 (origin: USA), and INC 13911. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your R1602 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for R1602

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part R1602, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number R1602 with NSN 5915-00-950-4307, 5915009504307

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5915-00-950-4307 Item PartTypeName: FILTER,LOW PASS	5915	009504307	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	7			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
666151-074	2	1	5

Characteristics Data of NSN 5915-00-950-4307, 5915009504307

MRC	Criteria	Characteristic
ABKW	OVERALL HEIGHT	2.125 INCHES MAXIMUM
ADAQ	BODY LENGTH	1.312 INCHES MAXIMUM
ADAT	BODY WIDTH	0.719 INCHES MAXIMUM
ADAU	BODY HEIGHT	1.750 INCHES MAXIMUM
AEBY	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.875 INCHES NOMINAL
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.281 INCHES NOMINAL
AFGA	OPERATING TEMP RANGE	-40.0 TO 85.0 DEG CELSIUS
AFSV	AVERAGE LIFE RATING IN HOURS	10000.0
AHAJ	REFERENCE FREQUENCY PER FUNCTION	1.5 KILOHERTZ BLANK
AHAU	INPUT IMPEDANCE PER FUNCTION W/LOAD	600.0 OHMS BLANK
AHAV	OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT	600.0 OHMS BLANK
AKEJ	MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNC
AKNA	INCLOSURE TYPE	HERMETICALLY SEALED
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	2 THREADED STUD
CQDR	INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS	4.0 BLANK
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 TAB,SOLDER LUG GROUND 3RD FUNCTION
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 TAB,SOLDER LUG INPUT 1ST FUNCTION
CQDW	FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 TAB,SOLDER LUG OUTPUT 2ND FUNCTION
CQDZ	MAXIMUM DIELECTRIC WITHSTANDING AC RMS VOLTAGE	100.0 VOLTS AT SEA LEVEL
CQFC	SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION	1.00 HERTZ BLANK AND 3.00 KILOHERTZ BLANK AND 3.90 KILOHERTZ BLANK AND 4.00 KILOHERTZ BLANK
CQJX	NOMINAL THREAD SIZE	0.112 INCHES
CQRG	BODY MATERIAL	METAL
CRBB	FREQUENCY BAND WIDTH PER FUNCTION	1.00 HERTZ BLANK AND 3.00 KILOHERTZ BLANK
CRBC	DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS	4.0 MAXIMUM BLANK AND 35.0 MINIMUM BLANK 1ST FUNCTION
CTJS	UNPACKAGED UNIT WEIGHT	6.000 OUNCES NOMINAL
STYL	STYLE DESIGNATOR	RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE

Schedule B & Trade

End Use : 41210	Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310)	Reception apparatus, nesoi
SITC : 76289	Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	7
MGMT_CTL	Q22tqx-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	061400 - Condensers/parts noi/capacitors
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components