Buy W8505 Transformer Pulse part by Cen Electronics

Part Number:  W8505
Manufacturer:  cen electronics
NIIN:  004129610
Item Name :  transformer pulse
CAGE Code:  08715
INC Code:  00208
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for W8505 (described as Transformer Pulse), manufactured by Cen Electronics with CAGE code 08715. This part is registered under NSN 5950-00-412-9610, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-412-9610, NCB code 00 (origin: USA), and INC 00208. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your W8505 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for W8505

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part W8505, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number W8505 with NSN 5950-00-412-9610, 5950004129610

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-00-412-9610

Item PartTypeName:

TRANSFORMER,PULSE

59500041296100P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
60956-1623

Characteristics Data of NSN 5950-00-412-9610, 5950004129610

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH3.515 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ACZBFREQUENCY RATING10.0 KILOHERTZ MINIMUM AND 15.0 KILOHERTZ MAXIMUM SINGLE COMPONENT
ACZHPRIMARY TO SECONDARY TURN RATIO1 TO 12 SINGLE COMPONENT
ACZXWINDING SHIELDING METHODINTERNAL SHIELD BROUGHT OUT TO TERMINAL SINGLE COMPONENT
ADAQBODY LENGTH5.015 INCHES MAXIMUM
ADATBODY WIDTH3.515 INCHES MAXIMUM
ADAUBODY HEIGHT4.265 INCHES MAXIMUM
AKNAINCLOSURE TYPEHERMETICALLY SEALED
AKPVMOUNTING FACILITY QUANTITY4 SINGLE GROUP
AXGYMOUNTING METHODTHREADED HOLE SINGLE GROUP
BPLCWINDING FUNCTION AND QUANTITY1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT
CMLPTHREAD QUANTITY PER INCH20 SINGLE GROUP
CQJXNOMINAL THREAD SIZE0.250 INCHES SINGLE GROUP
CRBZWINDING OPERATING CURRENT100.0 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE PRIMARY
CRGSDC RESISTANCE RATING IN OHMS0.100 SINGLE COMPONENT SINGLE SECONDARY
THSDTHREAD SERIES DESIGNATORUNC SINGLE GROUP
TTQYTERMINAL TYPE AND QUANTITY3 THREADED STUD AND 7 WIRE HOOK

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504500000 (NAICS 334416) Inductors, nesoi
SITC : 77125 Electrical inductors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top