Buy CM24613 Resistor Variable W part by Clausing Corp

Part Number: CM24613

Manufacturer: clausing corp

NSN: 5905-00-849-6915

NIIN: 008496915

Item Name : resistor variable w

CAGE Code: 48436

FSC: 5905 Resistors

INC Code: 37406

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for CM24613 (described as Resistor Variable W), manufactured by Clausing Corp with CAGE code 48436. This part is registered under NSN 5905-00-849-6915, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-849-6915, NCB code 00 (origin: USA), and INC 37406. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CM24613 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CM24613

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CM24613, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CM24613 with NSN 5905-00-849-6915, 5905008496915

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-849-6915 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON	5905	008496915		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
689009-253	C	2	5

Characteristics Data of NSN 5905-00-849-6915, 5905008496915

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABHP	OVERALL LENGTH	1.219 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.625 INCHES NOMINAL
ADAP	MOUNTING BUSHING LENGTH	0.500 INCHES NOMINAL
ADAQ	BODY LENGTH	0.562 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
ADAV	OVERALL DIAMETER	1.328 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFN	NONTURN DEVICE LOCATION	AT 9 OCLOCK
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	LOCKING BUSHING
CQCC	ELECTRICAL RESISTANCE PER SECTION	25.0 KILOHMS SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-30.0 TO 30.0 SINGLE SECTION
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB,SOLDER LUG
ABPM	BODY DIAMETER	0.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
AEFP	NONTURN DEVICE RADIUS	0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8533390080 (NAICS 334416)	Wirewound variable resistors, nesoi
SITC : 77233	Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9n-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	S9e
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	062960 - Reostats/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small