We've received your request for V900H (described as Saw Band Cutoff), manufactured by Clausing Industrial Inc with CAGE code 64501. This part is registered under NSN 3405-01-271-1415, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-271-1415, NCB code 01 (origin: USA), and INC 17910. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your V900H requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| ACZB | FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| AMSE | VOLTAGE RATING | 220.0 VOLTS MINIMUM AND 440.0 VOLTS MAXIMUM |
| BWMZ | CUTTING SPEED RANGE | +50.0/+5200.0 FEET PER MINUTE |
| BZZR | CUTTING BLADE WIDTH | 0.750 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 2 SPEED GEARED TRANSMISSION; MAGNETIC STARTER WITH 110 VOLT CONTROL AND OVERLOAD PROTECTION; SLIDING TABLE 26.0 IN. BY 27.750 IN.; TWO-WAY TABLE TILT 45.0 DEGREES RIGHT,15.0 DEGREES LEFT; 1 FRONT EDGE T-SLOT,4 TABLE TOP T-SLOTS; BUILT-IN HYDRAULIC POWER FEED WITH FAST TRAVERSE AND CUTTING CONTROL; 36 IN. THROAT; 14 IN. WORK HEIGHT UNDER TOP GUIDE; 3 BANDWHEELS 16.0 IN. DIA.,1.750 IN. THICK; BONDED RUBBER WHEEL TIRES; CARBIDE BLADE GUIDES WITH BACKUP ROLLER; 0 TO 35.0 IN. PER MINUTE FEED RATE; 2 GALLON HYDRAULIC TANK CAPACITY; 42 IN. TABLE HEIGHT; BUILT-IN BLADE WELDER,SHEAR,AND FLASH GRINDER FOR 1.0 IN. CAPACITY BLADE; BUILT-IN GROUNDED 110 VOLT RECEPTACLE; BUILT-IN AIR CHIP BLOWER; TABLE TRUNNION AND GUIDE WRENCH; OPERATION AND PARTS MANUAL; OVERALL LENGTH 80.0 IN.; OVERALL WIDTH 43.0 IN.; OVERALL HEIGHT 82.0 IN.; NET WEIGHT 1680 POUNDS; SHIPPING WEIGHT 2030 POUNDS |
| ANCY | HORSEPOWER RATING | 3 |
| BZZQ | CUTTING BLADE LENGTH | 180.000 INCHES MINIMUM AND 183.000 INCHES MAXIMUM |
| ACDC | CURRENT TYPE | AC |
| FAAZ | PHASE | THREE |
| BWLS | CUT TYPE FOR WHICH DESIGNED | DRY |
| End Use : 21120 | Metalworking machine tools |
|---|---|
| Schedule B : 8461500090 (NAICS 333517) | Sawing or cutting-off machines, metal removing, except numerically controlled, valued $3, 025 over, new |
| SITC : 73177 | Sawing or cutting-off machines, metalworking |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | A - Item does not contain precious metal. |
| AAC | V |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9---n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 131670 - Tools pwr o/t pwr hnd tools |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72E - Engineer and material handling equipment, test/tool sets and equipment |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
