Buy 40906 Transformer Power A part by Coast Advanced Chip Magnetics Inc

Part Number:  40906
NIIN:  000548580
Item Name :  transformer power a
CAGE Code:  22558
INC Code:  36166
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 40906 (described as Transformer Power A), manufactured by Coast Advanced Chip Magnetics Inc with CAGE code 22558. This part is registered under NSN 5950-00-054-8580, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-054-8580, NCB code 00 (origin: USA), and INC 36166. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 40906 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 40906

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 40906, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 40906 with NSN 5950-00-054-8580, 5950000548580

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-00-054-8580

Item PartTypeName:

TRANSFORMER,POWER AUTOTRANSFORME

59500005485800P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
3B90031-107621

Characteristics Data of NSN 5950-00-054-8580, 5950000548580

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.750 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1.200 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
ABTBMOUNTING HOLE DIAMETER0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM SINGLE GROUP
ACZBFREQUENCY RATING380.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT
ACZCINPUT-OUTPUT PHASE RELATIONSHIPSINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
ADAQBODY LENGTH2.600 INCHES MAXIMUM
ADATBODY WIDTH1.700 INCHES MAXIMUM
ADAUBODY HEIGHT2.650 INCHES MAXIMUM
AEHZMAXIMUM OPERATING TEMP200.0 DEG CELSIUS
AKNAINCLOSURE TYPEHERMETICALLY SEALED
AKPVMOUNTING FACILITY QUANTITY4 SINGLE GROUP
AXGYMOUNTING METHODFLANGE AND UNTHREADED HOLE SINGLE GROUP
BPLCWINDING FUNCTION AND QUANTITY1 PRIMARY,FIXED AUTOTRANSFORMER TYPE SINGLE COMPONENT
CRBZWINDING OPERATING CURRENT528.0 MILLIAMPERES AC NOMINAL SINGLE COMPONENT SINGLE PRIMARY INPUT
CRMJWINDING POWER RATING60.0 VOLTS-AMPERES SINGLE COMPONENT SINGLE PRIMARY INPUT
CWJSWINDING OPERATING VOLTAGE113.50 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY INPUT
CWJSWINDING OPERATING VOLTAGE6.50 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY OUTPUT
TTQYTERMINAL TYPE AND QUANTITY3 THREADED STUD

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504500000 (NAICS 334416) Inductors, nesoi
SITC : 77125 Electrical inductors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 595 - Transformer, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top