Buy F59515 Bushing Nonmetallic part by Codalex Ltd

Part Number: F59515

Manufacturer: codalex ltd

NSN: 5365-00-458-2374

NIIN: 004582374

Item Name : bushing nonmetallic

CAGE Code: 96344

FSC: 5365 Bushings Rings Shims and Spacers

INC Code: 39929

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for F59515 (described as Bushing Nonmetallic), manufactured by Codalex Ltd with CAGE code 96344. This part is registered under NSN 5365-00-458-2374, classified in FSG 53 Hardware and Abrasives / FSC 5365 Bushings Rings Shims and Spacers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-458-2374, NCB code 00 (origin: USA), and INC 39929. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your F59515 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for F59515

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part F59515, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 5365-00-458-2374, 5365004582374

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.281 INCHES MINIMUM FIRST HOLE AND 0.291 INCHES MAXIMUM FIRST HOLE
APGF	DESIGN TYPE	MULTIPLE HOLES
AYQE	HOLE SPACING	0.345 INCH CENTER TO CENTER
BWRQ	TAPERED BODY SMALLEST DIAMETER	0.640 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
BWRR	LONGER TAPER SMALLEST DIAMETER	0.640 INCHES MINIMUM AND 0.671 INCHES MAXIMUM
BWSL	BOTTOM TAPERED PORTION HEIGHT	0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
STYL	STYLE DESIGNATOR	ROUND FLANGED W/HOLES
AASF	NONMETALLIC HARDNESS RATING	25.0 MINIMUM DUROMETER AND 35.0 MAXIMUM DUROMETER
ABHP	OVERALL LENGTH	0.609 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
ASXK	HOLE QUANTITY	1 FIRST HOLE
BWRP	TAPERED BODY LARGEST DIAMETER	0.838 INCHES MINIMUM AND 0.868 INCHES MAXIMUM
BWSK	TAPERED PORTION HEIGHT	0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM
MATT	MATERIAL	RUBBER SYNTHETIC
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-STD-417, TYPE R, CLASS RS, GRADE RS320BF2 MIL STD SINGLE MATERIAL RESPONSE

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Z - No rating
NMFC:	000000 - No nmfc freight description
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware