Buy CS-6925 Coil Radio Frequenc part by Coil Specialty Co Inc

Part Number:  CS-6925
Alternate P/N:  CS6925
Manufacturer:  coil specialty co inc
NIIN:  010432011
Item Name :  coil radio frequenc
CAGE Code:  19193
INC Code:  06338
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for CS-6925 (described as Coil Radio Frequenc), manufactured by Coil Specialty Co Inc with CAGE code 19193. This part is registered under NSN 5950-01-043-2011, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-043-2011, NCB code 01 (origin: USA), and INC 06338. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CS-6925 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CS-6925

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part CS-6925, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CS-6925 with NSN 5950-01-043-2011, 5950010432011

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5950-01-043-2011

Item PartTypeName:

COIL,RADIO FREQUENCY

59500104320110P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
5904849523

Characteristics Data of NSN 5950-01-043-2011, 5950010432011

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH0.675 INCHES NOMINAL
ABHYTURN QUANTITY2.75 SINGLE COMPONENT SINGLE WINDING
ABKWOVERALL HEIGHT0.375 INCHES NOMINAL
ABMKOVERALL WIDTH0.375 INCHES NOMINAL
ACYVINDUCTANCE RATING0.064 MICROHENRIES MINIMUM AND 0.074 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING
ACZPCOIL FORM TYPEHOLLOW SINGLE COMPONENT
ACZRCORE CONSTRUCTIONS0LID SINGLE COMPONENT
ACZUADJUSTMENT DEVICE DRIVE TYPESLOTTED SCREW SINGLE COMPONENT
ADAQBODY LENGTH0.321 INCHES NOMINAL
ADARBODY OUTSIDE DIAMETER0.212 INCHES NOMINAL
AEHZMAXIMUM OPERATING TEMP85.0 DEG CELSIUS
AKNAINCLOSURE TYPEOPEN
AXGYMOUNTING METHODPLUG-IN SINGLE GROUP
BKPLRATING METHODELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
CQPZWINDING CONDUCTOR SIZE0.04030 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING
CRBZWINDING OPERATING CURRENT590.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING
CRGSDC RESISTANCE RATING IN OHMS0.010 SINGLE COMPONENT SINGLE WINDING
CTHDADJUSTMENT METHOD AND QUANTITY1 ADJUSTABLE CORE SINGLE COMPONENT
TTQYTERMINAL TYPE AND QUANTITY2 PIN

Schedule B & Trade

End Use : 20000 Generators, accessories
Schedule B : 8504500000 (NAICS 334416) Inductors, nesoi
SITC : 77125 Electrical inductors, n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 063420 - Transformers, noi, or transformer par
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top