Buy 401-0775 Bearing Ball Annula part by Continental Electronics Corp

Part Number: 401-0775

Alternate P/N: 4010775

Manufacturer: continental electronics corp

NSN: 3110-00-516-5490

NIIN: 005165490

Item Name : bearing ball annula

CAGE Code: 52151

FSC: 3110 Bearings Antifriction Unmounted

INC Code: 00014

Country: USA

NCB Code: 00

FSG: 31 Bearings

We've received your request for 401-0775 (described as Bearing Ball Annula), manufactured by Continental Electronics Corp with CAGE code 52151. This part is registered under NSN 3110-00-516-5490, classified in FSG 31 Bearings / FSC 3110 Bearings Antifriction Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 00-516-5490, NCB code 00 (origin: USA), and INC 00014. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 401-0775 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 401-0775

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 401-0775, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 401-0775 with NSN 3110-00-516-5490, 3110005165490

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-516-5490 Item PartTypeName: BEARING,BALL,ANNULAR	3110	005165490	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
005165490	5	1	C			A

Characteristics Data of NSN 3110-00-516-5490, 3110005165490

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	0.6993 INCHES MAXIMUM
ABXV	BORE DIAMETER	1.3778 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	2.8344 INCHES MINIMUM AND 2.8346 INCHES MAXIMUM
AGAV	END ITEM IDENTIFICATION	2320-01-097-0248,2320-01-097-0249,2320-01-100-7672,2320-01-097-0260,2320-01-195-7641 HEMTT (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS); MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
AGYE	SURFACE FINISH	GROUND
AGZC	LOAD DIRECTION	RADIAL
AGZD	BORE SHAPE	STRAIGHT
AKVV	INTERNAL CLEARANCE	0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
CTFZ	STANDARD TOLERANCE DESIGNATION	ABEC NO.1
FTLD	FUNCTIONAL DESCRIPTION	QUIET OPERATING MACHINERY
LBMA	LUBRICATION MATERIAL	GREASE OR OIL LUBRICATING
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-24139 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-L-6805 MIL SPEC 2ND MATERIAL RESPONSE
MATT	MATERIAL	STEEL CAGE
MATT	MATERIAL	STEEL COMP E50100 BALL
MATT	MATERIAL	STEEL COMP E50100 INNER RING
MATT	MATERIAL	STEEL COMP E50100 OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A295 ASSN STD SINGLE MATERIAL RESPONSE BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A295 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A295 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	FF-B-171 MFR REF SINGLE MATERIAL RESPONSE CAGE
RDAL	REFERENCE DATA AND LITERATURE	MIL-B-17931,TABLE 1,INDUSTRY BORE CODE 07
STYL	STYLE DESIGNATOR	NON-LOADING GROOVE,NON-SEPARABLE
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-B-17931 GOVERNMENT SPECIFICATION
ZZZT	NONDEFINITIVE SPEC/STD DATA	111 TYPE AND 1 CLASS

Schedule B & Trade

End Use : 50030	Military trucks, armored vehicles, etc.
Schedule B : 8710000090 (NAICS 336992)	Parts of armored fighting vehicles, motorized, whether or not fitted with weapons
SITC : 89111	Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	114820 - Bearings/bushings noi ball/roller
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings