Buy 221176 Adjuster Slack Brak part by Corbitt Co Inc

Part Number: 221176

Manufacturer: corbitt co inc

NSN: 2530-00-700-1732

NIIN: 007001732

Item Name : adjuster slack brak

CAGE Code: 72260

FSC: 2530 Vehicular Brake Steering Axle Wheel and Track Components

INC Code: 10090

Country: USA

NCB Code: 00

FSG: 25 Vehicular Equipment Components

We've received your request for 221176 (described as Adjuster Slack Brak), manufactured by Corbitt Co Inc with CAGE code 72260. This part is registered under NSN 2530-00-700-1732, classified in FSG 25 Vehicular Equipment Components / FSC 2530 Vehicular Brake Steering Axle Wheel and Track Components. Our verification process will confirm traceability through supporting identifiers including NIIN 00-700-1732, NCB code 00 (origin: USA), and INC 10090. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 221176 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 221176

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 221176, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 221176 with NSN 2530-00-700-1732, 2530007001732

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
2530-00-700-1732 Item PartTypeName: ADJUSTER,SLACK,BRAKE	2530	007001732		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10C7171	2	2	3

Characteristics Data of NSN 2530-00-700-1732, 2530007001732

MRC	Criteria	Characteristic
AYWB	CONNECTING ARM THICKNESS	0.517 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
AAJF	THREAD DIRECTION	RIGHT-HAND
AAPL	TORQUE LOAD RATING	22000.000 INCH-POUNDS
AAUB	HOLE DIAMETER	0.501 INCHES MINIMUM AND 0.503 INCHES MAXIMUM
AAZR	MAJOR DIAMETER	1.499 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
ABSA	SPLINE QUANTITY	10
ABVK	THREAD SIZE DESIGNATOR	0.125-27
ACSX	OFFSET DISTANCE	1.500 INCHES NOMINAL
AGJR	MINOR DIAMETER	1.214 INCHES MINIMUM AND 1.215 INCHES MAXIMUM
AJYP	SCREW THREAD SERIES DESIGNATOR	NPT
AMWE	ADJUSTMENT TYPE	SINGLE ARM
AXYS	SPLINE TYPE	STRAIGHT SPLINE
AYTR	CONNECTING ARM DESIGN	OFFSET
AYTT	OFFSET DIRECTION	RIGHT
AYTW	CONNECTING ARM HOLE QUANTITY	1
AYTX	CONNECTING ARM HOLE BUSHING	INCLUDED
AYWA	CONNECTING ARM CENTER TO CENTER DISTANCE BETWEEN SPLINE HOLE AND CONNECTION HOLE	5.250 INCHES NOMINAL
AZAF	LOCKING DEVICE TYPE	SPRING LOADED PLUNGER
AZAG	LUBRICATION PROVISION	PIPE PLUG
SHPE	SHAPE	STRAIGHT
ZZZV	FSC APPLICATION DATA	AIR BRAKE GROUP,TRUCK CHASSIS

Schedule B & Trade

End Use : 30230	Other parts and accessories of vehicles
Schedule B : 8708300050 (NAICS 336340)	Brakes and servo-brakes and parts, of motor vehicles of headings 8701 to 8705
SITC : 78433	Brakes and servo-brakes and parts thereof for tractors, motor cars and other motor vehicles, etc.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	Q - 70.0
LTL:	Q - 70.0
NMFC:	018400 - Auto brakes/shoes r pads etc
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	581 - Automobile parts, new