Buy 2C5010 Valve Check part by Crissair Inc

Part Number:  2C5010
Manufacturer:  crissair inc
NIIN:  000617877
Item Name :  valve check
CAGE Code:  99240
INC Code:  05487
Country:  USA
NCB Code:  00

We've received your request for 2C5010 (described as Valve Check), manufactured by Crissair Inc with CAGE code 99240. This part is registered under NSN 4820-00-061-7877, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-061-7877, NCB code 00 (origin: USA), and INC 05487. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 2C5010 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2C5010

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 2C5010, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 2C5010 with NSN 4820-00-061-7877, 4820000617877

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4820-00-061-7877

Item PartTypeName:

VALVE,CHECK

48200006178770N
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
1112-589993223

Characteristics Data of NSN 4820-00-061-7877, 4820000617877

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A ALL ENDS
AAJFTHREAD DIRECTIONRIGHT-HAND ALL ENDS
ADQUFLOW CONTROL DEVICEPOPPET
ADSUDISK LOADING METHODSPRING
AHNCCONNECTION STYLEFLARED (TUBE) ALL ENDS
AQLRVALVE OPERATION METHODAUTOMATIC
AWLSCONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
BBJXMOUNTING POSITIONHORIZONTAL OR VERTICAL
CMLPTHREAD QUANTITY PER INCH14 ALL ENDS
CQGMMAXIMUM OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
CQJXNOMINAL THREAD SIZE0.875 INCHES ALL ENDS
CQRBSEAT ANGLE37.0 DEGREES ALL ENDS
CWFDNOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.625 INCHES ALL ENDS
MATTMATERIALALUMINUM ALLOY BODY
MATTMATERIALALUMINUM ALLOY SEAT
MATTMATERIALSTEEL FLOW CONTROL DEVICE
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BODY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE SEAT
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,TYPE 416-CANCELED FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
MEDAMEDIA FOR WHICH DESIGNEDFUEL/OIL,HYDROCARBON SINGLE RESPONSE
SFTTSURFACE TREATMENTANODIZE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE
STYLSTYLE DESIGNATORSTRAIGHT THRU
THSDTHREAD SERIES DESIGNATORUNF ALL ENDS

Schedule B & Trade

End Use : 21180 Industrial machines, other
Schedule B : 8481309000 (NAICS 332911) Check valves of materials other than copper, iron or steel
SITC : 74730 Check valves

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 051080 - Faucets, bibcocks, gates valves
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 576 - Metal and metal products, nos, (less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top