Buy PA800 007 Switch Rotary part by Crl Components Inc

Part Number:  PA800 007
Manufacturer:  crl components inc
NIIN:  007203004
Item Name :  switch rotary
CAGE Code:  71590
INC Code:  02134
Country:  USA
NCB Code:  00

We've received your request for PA800 007 (described as Switch Rotary), manufactured by Crl Components Inc with CAGE code 71590. This part is registered under NSN 5930-00-720-3004, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-720-3004, NCB code 00 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your PA800 007 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PA800 007

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part PA800 007, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number PA800 007 with NSN 5930-00-720-3004, 5930007203004

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-720-3004

Item PartTypeName:

SWITCH,ROTARY

59300072030040P
CIICHCCESDPMICCriticalityENAC
U S
Part NumberISCRNVCRNCCHCCMSDSSADC
270201A6295

Characteristics Data of NSN 5930-00-720-3004, 5930007203004

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A SINGLE MOUNTING FACILITY
AASATHREAD LENGTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM SINGLE MOUNTING FACILITY
ABKWOVERALL HEIGHT1.000 INCHES NOMINAL
ABNBFIRST FLAT LENGTH0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM SINGLE ACTUATOR
ABWVSHAFT DIAMETER0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR
ABXFSHAFT LENGTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM SINGLE ACTUATOR
AEFPNONTURN DEVICE RADIUS0.375 INCHES NOMINAL AT 9:00 OCLOCK
AFBHINDIVIDUAL SECTION QUANTITY6
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP NONSYMMETRICAL
CQMKCONTACT VOLTAGE RATING IN VOLTS110.0 AC AT SEA LEVEL
CQRQSHAFT FLAT/SLOT ANGULAR LOCATION270.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY4 SINGLE ACTUATOR
CRSJSHAFT TYPEROUND,NONPARALLEL FLATTED SINGLE ACTUATOR
CSCFTERMINAL TYPETAB,SOLDER LUG
CSHWCONTACT SWITCHING ACTIONMAKES BEFORE BREAKS EACH SECTION FRONT
CSHWCONTACT SWITCHING ACTIONMAKES BEFORE BREAKS EACH SECTION REAR
CSLCSWITCH ACTUATOR POSITIONING INCREMENT30.0 DEGREES SINGLE ACTUATOR
CSMWDETENT ROTATIONAL TORQUE RANGE22.000 TO 42.000 INCH-OUNCES SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
CTHFCONTACT LOAD CURRENT RATING2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL
PMLCPRECIOUS MATERIAL AND LOCATIONCLIPS AND ROTOR BLADES SILVER
PRMTPRECIOUS MATERIALSILVER
TESTTEST DATA DOCUMENT81349-MIL-S-3786/5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECT
ABHPOVERALL LENGTH5.545 INCHES MINIMUM AND 5.600 INCHES MAXIMUM
ABMKOVERALL WIDTH0.937 INCHES NOMINAL
AFDCNONTURN DEVICE TYPETAB AT 9:00 OCLOCK
AXGYMOUNTING METHODTHREADED BUSHING SINGLE MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.375 INCHES SINGLE MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS28.0 DC AT SEA LEVEL
CTDNSWITCH ACTUATOR STOP DEVICE TYPEFIXED STOP SINGLE ACTUATOR
STYLSTYLE DESIGNATORCIRCULAR WAFER,BUSHING MOUNT
THSDTHREAD SERIES DESIGNATORUNEF SINGLE MOUNTING FACILITY

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509020 (NAICS 335931) Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1, 000 v
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC S - Item contains silver.

NSN Management Codes

AAC X
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top