Buy 2S-DAA-025 Ammeter part by Crompton Modutec Inc

Part Number: 2S-DAA-025

Alternate P/N: 2SDAA025

Manufacturer: crompton modutec inc

NSN: 6625-01-287-8310

NIIN: 012878310

Item Name : ammeter

CAGE Code: 32171

FSC: 6625 Electrical and Electronic Properties Measuring and Testing Instruments

INC Code: 16450

Country: USA

NCB Code: 01

FSG: 66 Instruments And Laboratory Equipment

We've received your request for 2S-DAA-025 (described as Ammeter), manufactured by Crompton Modutec Inc with CAGE code 32171. This part is registered under NSN 6625-01-287-8310, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-287-8310, NCB code 01 (origin: USA), and INC 16450. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 2S-DAA-025 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2S-DAA-025

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 2S-DAA-025, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-287-8310, 6625012878310

MRC	Criteria	Characteristic
APPN	ACCURACY IN PERCENT	-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
ABKW	OVERALL HEIGHT	2.270 INCHES NOMINAL
ADAG	MOUNTING STUD LENGTH	0.500 INCHES NOMINAL
AAPB	DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS	3000.0
AQEC	MOVEMENT TYPE	MOVING COIL, PERMANENT MAGNET
BLKZ	MOUNTING STUD DIAMETER	0.112 INCHES NOMINAL
CTTD	CIRCUIT ATTACHMENT METHOD AND QUANTITY	2 THREADED STUD
AACT	CIRCUIT CURRENT FOR WHICH DESIGNED	DC
APSW	METER BODY DIAMETER BEHIND MOUNTING FLANGE	2.140 INCHES NOMINAL
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	4 THREADED STUD
ANRL	MOUNTING ARRANGEMENT STYLE	FOUR HOLE/STUD RECTANGULAR/SQUARE
AMQY	INSTALLATION DESIGN	PANEL
APMM	DIAL SCALE MARKING COLOR	BLACK SINGLE INDICATOR SINGLE RANGE
AQFY	BACKGROUND COLOR	WHITE SINGLE INDICATOR SINGLE RANGE
ABMK	OVERALL WIDTH	2.990 INCHES NOMINAL
BLSB	SCALE SELECTION METHOD	TERMINAL
CTQL	MOVEMENT SUSPENSION METHOD	TAUT BAND
SFTT	SURFACE TREATMENT	PAINT
ABHP	OVERALL LENGTH	2.200 INCHES NOMINAL
AMKD	INDICATOR TYPE	DIAL W/POINTER
ADZC	ENVIRONMENTAL PROTECTION	AIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT
ABKQ	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	1.880 INCHES NOMINAL
ABKR	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	1.880 INCHES NOMINAL
CBBL	FEATURES PROVIDED	ZERO ADJUSTER
ZZZV	III FSC APPLICATION DATA	TEST SET,ELECT. EQUIP.
BHDC	SCALE GRADUATION TYPE	LINEAR SINGLE INDICATOR SINGLE RANGE
AKYN	FURNISHED ITEMS AND QUANTITY	NUT 6; LOCKWASHER 6; SEAL 1
APST	METER DEPTH BEHIND MOUNTING FLANGE	1.300 INCHES NOMINAL
BHMW	MEASUREMENT RANGE	0.0 TO 25.0 AMPERES, DC SINGLE INDICATOR SINGLE RANGE
ANTG	SENSITIVITY RATING	0.002 OHMS
ABWG	SCALE DIVISION QUANTITY	25 SINGLE INDICATOR SINGLE RANGE
SPCL	SPECIAL TEST FEATURES	COMPLIES WITH ANSI C39.0-1982
BHSX	(NON-CORE DATA) CIRCUIT CONSTRUCTION TYPE	NONELECTRONIC
FEAT	SPECIAL FEATURES	RUGGEDIZED
APSN	(NON-CORE DATA) PANEL FOR WHICH DESIGNED	NONMAGNETIC
ASSS	POINTER COLOR	BLACK SINGLE INDICATOR SINGLE RANGE
STYL	STYLE DESIGNATOR	RECTANGULAR FLUSH MTG
MATT	MATERIAL	PLASTIC
NHCF	NUCLEAR HARDNESS CRITICAL FEATURE	NONHARDENED
AWZJ	POWER SOURCE	EXTERNAL

Schedule B & Trade

End Use : 21160	Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515)	Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479	Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown