AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
+1-714-705-4780 sales@aerospaceexchange.com
QUICK QUOTE HERE
Home   /   Crompton Modutec Inc    /   Part T3S DMA 001 KW 28Y

Buy T3S-DMA-001-KW-28Y Ammeter part by Crompton Modutec Inc

Part Number:  T3S-DMA-001-KW-28Y
Alternate P/N:  T3SDMA001KW28Y
Manufacturer:  crompton modutec inc
NSN:  6625-01-292-7314
NIIN:  012927314
Item Name :  ammeter
CAGE Code:  32171
INC Code:  16450
Country:  USA
NCB Code:  01

We've received your request for T3S-DMA-001-KW-28Y (described as Ammeter), manufactured by Crompton Modutec Inc with CAGE code 32171. This part is registered under NSN 6625-01-292-7314, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-292-7314, NCB code 01 (origin: USA), and INC 16450. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your T3S-DMA-001-KW-28Y requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for T3S-DMA-001-KW-28Y

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload  

How to Begin the Quotation Process

  1. Fill out and submit the form for part T3S-DMA-001-KW-28Y, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-292-7314, 6625012927314

MRCCriteriaCharacteristic
BLKZMOUNTING STUD DIAMETER0.112 INCHES NOMINAL
SFTTSURFACE TREATMENTPAINT
CBBLFEATURES PROVIDEDRECTIFIER CIRCUIT AND SELF-ILLUMINATION FACILITY AND ZERO ADJUSTER
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS3000.0
AWZJPOWER SOURCEEXTERNAL
AQFYBACKGROUND COLORWHITE SINGLE INDICATOR SINGLE RANGE
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED STUD
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.250 INCHES NOMINAL
APMMDIAL SCALE MARKING COLORBLACK SINGLE INDICATOR SINGLE RANGE
AMQYINSTALLATION DESIGNPANEL
ANRLMOUNTING ARRANGEMENT STYLEFOUR HOLE/STUD RECTANGULAR/SQUARE
APSTMETER DEPTH BEHIND MOUNTING FLANGE1.300 INCHES NOMINAL
AQECMOVEMENT TYPEMOVING COIL, PERMANENT MAGNET
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH2.240 INCHES NOMINAL
BHMWMEASUREMENT RANGE0.0 TO 1.0 MILLIAMPERES, DC SINGLE INDICATOR SINGLE RANGE
APPNACCURACY IN PERCENT-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
BLSBSCALE SELECTION METHODTERMINAL
ASSSPOINTER COLORBLACK SINGLE INDICATOR SINGLE RANGE
ABMKOVERALL WIDTH3.700 INCHES NOMINAL
FEATSPECIAL FEATURESRUGGEDIZED; INSULATED TERMINALS
ABHPOVERALL LENGTH2.210 INCHES NOMINAL
ADZCENVIRONMENTAL PROTECTIONAIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT
AKYNFURNISHED ITEMS AND QUANTITYNUT 6; LOCKWASHER 6; SEAL 1
BHDCSCALE GRADUATION TYPELINEAR SINGLE INDICATOR SINGLE RANGE
ADAGMOUNTING STUD LENGTH0.500 INCHES NOMINAL
ZZZVIII FSC APPLICATION DATATEST SET,ELECT. EQUIP.
CTQLMOVEMENT SUSPENSION METHODTAUT BAND
MATTMATERIALPLASTIC
SPCLSPECIAL TEST FEATURESCOMPLIES WITH ANSI C39.1-1981
ANTGSENSITIVITY RATING35.0 OHMS
APSN(NON-CORE DATA) PANEL FOR WHICH DESIGNEDNONMAGNETIC
BHSX(NON-CORE DATA) CIRCUIT CONSTRUCTION TYPENONELECTRONIC
APSWMETER BODY DIAMETER BEHIND MOUNTING FLANGE2.820 INCHES NOMINAL
AMKDINDICATOR TYPEDIAL W/POINTER
STYLSTYLE DESIGNATORRECTANGULAR FLUSH MTG
ABKWOVERALL HEIGHT2.870 INCHES NOMINAL
NHCFNUCLEAR HARDNESS CRITICAL FEATURENONHARDENED
ABWGSCALE DIVISION QUANTITY50 SINGLE INDICATOR SINGLE RANGE
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY2 THREADED STUD

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

Find Most Relevant Part No of T3S-DMA-001-KW-28Y

Recently Viewed Parts

T3S-DMA-001-KW-28Y

RFQ

RC30BF105K

RFQ

BROWSE BY CATEGORIES

Complete Aerospace and NSN Parts Purchasing Platform

asach

AS9120B and ISO 9001:2015
asap_member

Aviation Suppliers Association Member
certified_company

FAA AC 0056B Accredited
as6081_supplier

AS 6081:2012 Certification
esd_association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top