We've received your request for 45W320 (described as Capacitor Fixed Pla), manufactured by Csi Technologies Inc with CAGE code 10026. This part is registered under NSN 5910-01-172-8503, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-172-8503, NCB code 01 (origin: USA), and INC 00006. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 45W320 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-01-172-8503 Item PartTypeName: CAPACITOR,FIXED,PLASTIC DIELECTR | 5910 | 011728503 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 45W320 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/THD MTG HOLE(S)/STUD(S),TERMINAL(S) ON ONE SURFACE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | 12.650 INCHES MINIMUM AND 12.850 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 4.820 INCHES MINIMUM AND 4.900 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 4.750 INCHES MAXIMUM |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 9.500 INCHES NOMINAL |
| AEBT | TERMINAL DIAMETER | 0.250 INCHES NOMINAL |
| AEBU | TERMINAL HEIGHT FROM BODY | 0.750 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 3.000 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 12.250 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| AFHW | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED MOUNTING STUDS |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.500 MICROFARADS SINGLE SECTION |
| CQJJ | NONDERATED OPERATING TEMP | 0.0 DEG CELSIUS MINIMUM AND 80.0 DEG CELSIUS MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 40000.0 DC SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00 TO 15.00 PERCENT SINGLE SECTION |
| CWJK | CASE MATERIAL | METAL |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 1000.0 MEGOHMS |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 |
| CWSS | DIELECTRIC MATERIAL | PLASTIC |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 STANDOFF,THREADED STUD |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8532250080 (NAICS 334416) | Fixed capacitors, dielectric of paper or plastic, nesoi |
| SITC : 77866 | Paper or plastics dielectric fixed capacitors |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | X |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | P - 77.5 |
| NMFC: | 061400 - Condensers/parts noi/capacitors |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
