Buy 20-7170B196SCIM Meter Flow Rate Ind part by Danaher Corporation

Part Number: 20-7170B196SCIM

Alternate P/N: 207170B196SCIM

Manufacturer: danaher corporation

NSN: 6680-01-082-4842

NIIN: 010824842

Item Name : meter flow rate ind

CAGE Code: 65984

FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments

INC Code: 38346

Country: USA

NCB Code: 01

FSG: 66 Instruments And Laboratory Equipment

We've received your request for 20-7170B196SCIM (described as Meter Flow Rate Ind), manufactured by Danaher Corporation with CAGE code 65984. This part is registered under NSN 6680-01-082-4842, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-082-4842, NCB code 01 (origin: USA), and INC 38346. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 20-7170B196SCIM requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 20-7170B196SCIM

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 20-7170B196SCIM, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6680-01-082-4842, 6680010824842

MRC	Criteria	Characteristic
ARQS	Construction	OPEN POST W/PROTECTION SHIELD
BHSQ	Float Type	GUIDED
BJDM	Float Material	STEEL, STAINLESS OR GLASS OR SAPPHIRE OR TANTALUM OR TUNGSTEN CARBIDE
AHZU	Integral Relief Valve	NOT INCLUDED
APSJ	Scale Quantity	1
ATEQ	Scale Type	MILLIMETER REFERENCE READING
AWAE	Float Quantity	1
ACQW	Inlet Connection Type	THREADED
AXGY	Mounting Method	DIRECT LINE OR FLUSH PANEL OR SURFACE PANEL
AWGJ	Tube Material	GLASS
BMHW	Guide Type	FLUTED TUBE
CPZF	Metering Tube Quantity	1
CPZJ	Dial Scale Smallest Increment	1MM
CPZM	Spinning Float	NOT INCLUDED
CPZQ	Inlet Connection Device Type	STATIONARY
CPZS	Outlet Connection Device Type	STATIONARY
CPZG	Maximum Water Capacity In Gallons Per Minute	0.5
CPZH	Maximum Air Capacity In Cubic Feet Per Minute	2.2
CPZN	Integral Pulsation Dampener	NOT INCLUDED
CPZP	Inlet Connection Position For Which Designed	HORIZONTAL
CPZT	Alarm Signal	NOT INCLUDED
BNHN	Integral Heat Source	NOT INCLUDED
BPHD	Maximum Working Pressure	200.0 POUNDS PER SQUARE INCH
AXQG	Carrying Handle	NOT INCLUDED
APGF	Design Type	CASE
BHBY	Dial Scale Marking Range	0
BHCM	Outlet Connection Size	0.250 OR 0.125 IN. NPT
BHJT	Base	NOT INCLUDED
AGAV	End Item Identification	4920-01-053-2833 TEST STAND
ABHP	Overall Length	9.813 INCHES NOMINAL
ARTH	Outlet Connection Type	THREADED
AMKD	Indicator Type	BALL FLOAT
MRC	Decoded Requirement	Clear Text Reply
CPZD	Inlet Connection Size	0.250 OR 0.125 IN. NPT
CPZK	Dial Scale Reference Pointer	NOT INCLUDED
CPZR	Outlet Connection Position For Which Designed	HORIZONTAL
APQB	Unit Type	MOUNTED

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	-------
Quantity per pack	1
Repariability	If condemned or uneconomically repairable , then dispose at direct support (ds) level.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	J - 100.0
LTL:	W - Rating variable
NMFC:	136800 - Flow, noi
SHC:	Z - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	657 - Instruments, electric meter