Buy APC1 1-8 109 Resistor Variable W part by Data Instruments Inc

Part Number:  APC1 1-8 109
Alternate P/N:  APC118109
Manufacturer:  data instruments inc
NIIN:  008249364
Item Name :  resistor variable w
CAGE Code:  06880
INC Code:  37406
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for APC1 1-8 109 (described as Resistor Variable W), manufactured by Data Instruments Inc with CAGE code 06880. This part is registered under NSN 5905-00-824-9364, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-824-9364, NCB code 00 (origin: USA), and INC 37406. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your APC1 1-8 109 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for APC1 1-8 109

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part APC1 1-8 109, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number APC1 1-8 109 with NSN 5905-00-824-9364, 5905008249364

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-824-9364

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,NON

59050082493640N
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
14W2-2719625

Characteristics Data of NSN 5905-00-824-9364, 5905008249364

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH2.470 INCHES NOMINAL
ABPMBODY DIAMETER1.200 INCHES NOMINAL
AEDQUNDERCUT DIAMETER0.125 INCHES MAXIMUM
AEFKMAXIMUM STARTING TORQUE5.00 INCH-OUNCES
CBBLFEATURES PROVIDEDSHAFT SEAL
CQCCELECTRICAL RESISTANCE PER SECTION1.000 KILOHMS 2ND SECTION
CQCCELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS 1ST SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS3.0 FREE AIR 1ST SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
FEATSPECIAL FEATURESINNER SHAFT FLAT DIMENSIONS; 0.280 INCHES LENGTH NOMINAL; 0.080 INCHES HEIGHT NOMINAL
AAPNSECTION QUANTITY2
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
ABWVSHAFT DIAMETER0.2498 INCHES NOMINAL
ABXFSHAFT LENGTH1.380 INCHES NOMINAL
ADAPMOUNTING BUSHING LENGTH0.380 INCHES NOMINAL
ADAQBODY LENGTH1.090 INCHES NOMINAL
ADAVOVERALL DIAMETER1.620 INCHES NOMINAL
AEDXSHAFT STYLEROUND,STEPPED
AEDZSHAFT BEARING TYPESLEEVE
AEFDACTUATOR TYPEDUAL CONCENTRIC
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION320.0 NOMINAL
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE20.00 INCH-OUNCES
AEFNNONTURN DEVICE LOCATIONAT 12 OCLOCK
AEFPNONTURN DEVICE RADIUS0.437 INCHES NOMINAL
AGQLUNDERCUT LENGTH0.380 INCHES NOMINAL
AJYNSCREW THREAD DIAMETER0.375 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODSTANDARD BUSHING
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG320.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 ALL SECTIONS
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.5 FREE AIR 2ND SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 ALL SECTIONS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 ALL SECTIONS
TTQYTERMINAL TYPE AND QUANTITY6 TURRET

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top