Buy EPA21A00-061 Pin Grooved Headles part by Dcns Services Brest

Part Number: EPA21A00-061

Alternate P/N: EPA21A00061

Manufacturer: dcns services brest

NSN: 5315-00-541-8643

NIIN: 005418643

Item Name : pin grooved headles

CAGE Code: F3014

FSC: 5315 Nails Keys and Pins

INC Code: 02386

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for EPA21A00-061 (described as Pin Grooved Headles), manufactured by Dcns Services Brest with CAGE code F3014. This part is registered under NSN 5315-00-541-8643, classified in FSG 53 Hardware and Abrasives / FSC 5315 Nails Keys and Pins. Our verification process will confirm traceability through supporting identifiers including NIIN 00-541-8643, NCB code 00 (origin: USA), and INC 02386. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your EPA21A00-061 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for EPA21A00-061

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part EPA21A00-061, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number EPA21A00-061 with NSN 5315-00-541-8643, 5315005418643

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-00-541-8643 Item PartTypeName: PIN,GROOVED,HEADLESS	5315	005418643	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
420149-3	2	9	5

Characteristics Data of NSN 5315-00-541-8643, 5315005418643

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	CHAMFERED
ABHP	OVERALL LENGTH	6.875 INCHES NOMINAL
ABMZ	DIAMETER	1.999 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
ABNZ	EFFECTIVE LENGTH	3.188 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	1.875 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.406 INCHES MINIMUM AND 0.422 INCHES MAXIMUM
AMCS	FIRST END TAPER LENGTH	0.062 INCHES NOMINAL
CQBB	SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
CRDY	FIRST END LOCATION	BOTH ENDS
CRMG	FIRST END TAPER ANGLE	45.0 DEGREES NOMINAL
CSYM	SURFACE FINISH	250.0 MICROINCHES BOTH ENDS
MATT	MATERIAL	COPPER ALLOY OVERALL
STYL	STYLE DESIGNATOR	GROOVE
TEST	TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7415290000 (NAICS 332722)	Copper screws, nuts, bolts, rivets, and other fasteners not threaded
SITC : 69432	Washers (including spring washers) and similar articles, not threaded, of copper

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	9b----9
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	G - 125.0
LTL:	G - 125.0
NMFC:	139780 - Nickel articles noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	576 - Metal and metal products, nos, (less than 35 feet)